Thermal Fuse (Limit: 183) WP33001762

Hi Corrado, Thank you for your question. If your dryer is not drying, there are some parts that you will need to check to see which one is causing the issue. You will need to check the internal bias thermostat, the coils, the radiant flame sensor, the lint filter, the high limit thermostat and the baffles. You should also check the exhaust vent to see if it is clogged with lint. If so clean it out. I hope this helps. Thank you and have a great day!

Hi Allan, Thank you for your question. If the control panel is lighting up every where but where you set the time to dry, check the connections between the control panel, part number PS2200127, and the electronic control board, part number, PS2036598. If the connections are fine, the issue may be with the control panel, part number or the electronic control board. You will need to test the control panel with a multi-meter and for the electronic control board, you will need to inspect it visually for signs of damage or burn marks. If the electronic control board is causing the issue, it has been discontinued and you will need to contact Whirlpool for information on a replacement or you will need to try the following: Using a search engine to type your part number and see if other retailers still have this part in stock. Visiting online stores such as eBay and finding sellers that have this part. Trying retailers and repair stores in your local area to see if they have the part in their inventory. Talking to a local repair technician, who may have the part you need, or may be able to repair your existing part. We hope this helps. Thank you and have a great day.

Hi Aaron, thank you for asking. This thermal fuse, part number FIX11741067, is compatible with your model. If your dryer is shutting off too soon, we suggest that you check the dryer cycling thermostat, door switch kit, coil kit, and thermal fuse, as these could be the culprits. If you require assistance to place an order, please contact customer service. We hope that helps!

Hello Robert, thank you for writing. You can test it with a multi-meter. If the reading is 'infinite', then the fuse is blown and needs to be replaced. This is the correct replacement for your model. We hope this helps.

Hello Steven, Thank you for the question. I suggest checking the Door Switch Kit, PartSelect Number PS1964648. You can test it with a multi meter to check for continuity. Hope this helps!