Meat Drawer Cover and Shelf Frame WP2161491

I first replaced the housing holding the water filter because during my effort to diagnose the problem I couldn't get the friction fittings to seal back up and they kept leaking. I hoped that replacing the filter housing would affect the flow problem but it didn't. I then replaced the valve. The replacement part was a little different ... Read more in design than the original part but wasn't too difficult to figure out. My guess is that the original valve has some kind of electric solenoid that wasn't opening all the way. New value solved the problem. No special tools or techniques were required. Just had to unplug water lines and electrical connectors and figure out the way to plug the new valve in.

pulled out old shelf and inserted new shelf.

Took out the old shelf and removed the glass. Put in the new shelf, sat the glass back in it, and put in the meat drawer. It might have taken 3 minutes. Easy and painless.

I didn't. My daughter did it in less that two minutes. It was very easy.

Simply had to remove the drawer and insert new roller frame and reinsert the drawer. Very easy. Excellent service, quick delivery. Thank you so much

Just changed the old frame for the new one. No tools needed.The new part fitted perfectly.

simply removed the bens installed the new shelves and reinstalled the bens.

took out the old put in the new

Unbelievable. Part arrived in less than 24 hours from ordering. Installed in 2 to 3 minues. Wife thinks I can fix anything.

removed middle drawer removed broken lower cover and shelf frame and drawer removed front/rear plastic seals from broken frame reinstalled on new frame reinstalled in frig. works fine