Cartridge Top - Stainless Steel WP2002F208-50

Hi Isabel, thank you for your question. Be sure to cut power to your appliance and remove any parts before doing tests. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your element. It should be reading between 0 - 50 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. It could also be your wiring that is the issue but you should see visual damage on that part in most cases. I hope that helps. Good luck with your repair.

Hello Anna, Thank you for your question. We apologize, but we do not have a parts list available for your model, thus we cannot find any parts compatible to your machine. We suggest getting in contact with the manufacturer to see if they can provide a part number for the part you are looking for. If they provide a part number, feel free to come back to our website to see if we can sell you the part at a lower price. We hope this helps.