This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s pantry drawer to help contain the items inside and to keep your refrigerator door from sliding all the way out. It is rated as "medium" difficulty to install, is constructed of plastic and comes in white. If broken or missing, the pantry drawer will not stay in place and the part should be replaced. Refer to your user manual and model number to ensure this is the correct part for you. This kit includes both the right and left side end caps, as well as the pins that will hold them in place. To replace an end cap, remove the three screws holding it in place. Then, remove the pin and end cap, replacing the old end cap with the new end cap. In the past, the left and right end caps were sold separately, but the part has been updated and now includes both sides. The part is sold as a kit, and unfortunately, as such none of the parts are available individually.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Refrigerator Pantry End Cap Kit, LH and RH
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close | Fridge too cold | Noisy
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Cole M - September 1, 2024
Verified Purchase
Easy repair
Perfect fit
★★★★★
★★★★★
Olivia S - August 28, 2024
Verified Purchase
Easy fast repair
Video made it so easy! My daughter and I fixed this in a jiff. Fit perfect, easy to install and reasonably priced!
★★★★★
★★★★★
Linda L - August 14, 2024
Verified Purchase
Peefect fit
Part fit as it should.
★★★★★
★★★★★
Thomas R - June 28, 2024
Verified Purchase
Great part, fit as expected!
I ordered the wrong part initially. You could have mentioned there were two sizes. Once the new one arrived, it was installed in minutes.
★★★★★
★★★★★
Stephanie T - June 15, 2024
Verified Purchase
Exactly what I needed
It was easy to figure out the part I needed. It was delivered quickly and easy to install.
★★★★★
★★★★★
JIM L - May 3, 2024
Verified Purchase
Refrigerator
I needed a right end cap but had to by both right and left.
Replacement was easy.
★★★★★
★★★★★
Roger E - April 21, 2024
Verified Purchase
Easy repair
The part was delivered as ordered and was installed with ease.
★★★★★
★★★★★
Matthew N - March 30, 2024
Verified Purchase
Worked perfect
Easy peasy
★★★★★
★★★★★
Thomas H - February 24, 2024
Verified Purchase
Quick delivery, the right parts, and great demo video
Moved into a new apartment and found a broken plastic piece in the refrigerator. PartSelect had the right parts to replace it, and the video demonstration of how the make the repair was terrific. I'm not especially handy, but by following the video, I easily made the repair/replacement.
★★★★★
★★★★★
Larry H - February 21, 2024
Verified Purchase
Worked well, easy to install.
The part was packaged well, arived on time and there was good vidios to guide me.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 204 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Crisper Frame was cracked at the back and piece that deli drawer cover snaps into was broken on right side
Removed crisper drawers, removed glass, removed broken crisper frame, removed deli drawer cover, removed glass and removed deli drawer. Removed left and right pantry end caps and installed new pantry end caps. Re-installed pantry drawer, glass and drawer cover. Assembled new crisper frame with parts from old according to video instruct
... Read moreions, installed center rail and installed new crisper frame . Re-installed crisper drawers and glass. The videos were extremely easy to follow.
Watched the excellent video on Parts Select. Followed the disassembly instructions from the video and replaced it just like that. Very quick and easy because of the video.
The only reason why it took me so long to complete the repair was the fact I had to clean a spill I had from I don't know how long ago.
Saved me
... Read morea ton of money doing it myself!
Read less
Mark from REDMOND, WA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tab off of veggie drawer broke off
ordered part -- great delivery-- 3 days--- removed damaged bracket and replaced with new --- very easy to order correct part per web pg thanks
ALBERT from BERLIN, VT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Tab on which the lid swings broke on the left side.
An ideal opportunity to clean the tracks for the glass top and sides. I just removed the two (2) screws with nut driver and gently eased the end cap off by slightly pulling it forward and up, inserting the lid onto the new endcap and slipping the cap back into place securing with the two screws. as easy as pie. I did not change the right
... Read moreend cap as there was no need for it, But if U have to change it U must also first disconnect the back plate.
Read less
kenneth from CLEARWATER, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the kids close the refer door with the meat drawer cover open, it breaks the plastic tab that it pivots on off
remove meat drawer and both crispers, then the shelf below the crispers pull the 2 screws that hold the drawer slide . remove the 3 screws that hold the pantry end cap on, replace it and reverse the operation
ron from ZEELAND, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The left side was a snap. The right side, which contains the cold air controls, was a little more challenging. After a few minutes, I figured out how to release the tabs in order to free up the mechanism.
Two screws hold each of the panels onto the refrigerator. Two more screws hold the metal drawer guides. Once the panel is released from the refrigerator, the metal drawer guides need to be transferred to the new panel. This step is repeated for the right side panel. The right side panel contains the air flow mechanism controlling how
... Read more much cold air is released into the pantry drawer. It is attached by a network of plastic tabs which need to be pushed back in order to release the mechanism from the panel. A flat screwdriver is helpful to do this. I'm not positive that the air flow mechanism along the back of the refrigerator went back into place correctly; it seemed to sag a bit as it's not attached by screws.
Read less
Paul from SANTA CRUZ, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pin for drawer lid broke off
Empty drawer and take out . remove glass shelf and front and rear shelf braces. remove 2 screws holding pantry end cap to fridge. remove rear bracket by unsnapping clips. remove temp control arm. and reattach to new end cap. reinstall rear bracket to fridge and align end cap, align screws and tighten. reinstall drawers and shelf brackets.
... Read more replace glass shelf. and reattach lid to brackets. Open beer and enjoy success.
Read less
John from WATERBURY, CT
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
62 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
September 22, 2017
The little tab that holds "pantry drawer lid" in place on the ride side "pantry end cap" broke off. Two questions:1>do you replace the whole pantry end cap for just that little tab? 2>the right and left side are different but you only sell one. The right side has the temperature adjustment. Do i need to order a right side and if yes, i don't see it on the schematic.
For model number KBFS25EWMS5
Hi John,
Thank you for your inquiry. The tab on the end cap is not sold separately and is sold with the end cap. The end caps are sold in a kit with both the left and right side and the part number for the kit is PS11738134. I hope this helps. Thank you and have a great day!
244 people found this helpful.
Was this helpful?
Thank you for voting!
Paula
August 23, 2017
I have the lid for the wide n fresh deli drawer however the clip on the left side to hook the lid broke. What par to i need in order to put the lid on the deli drawer back on . Right now the drawer works just no lid/cover.
For model number MFI2568AES
Hi Paula,
Thank you for your inquiry. If the clip on the end cap has broken off you will need this end cap to fix it. I hope this helps. Thank you and have a great day!
29 people found this helpful.
Was this helpful?
Thank you for voting!
Maggie
September 11, 2017
I believe the part I need is #3 but for the other side(left side) do you sell that part?
For model number MFD2560HEQ
Hi Maggie.
Thank you for the question. This part has been updated by the manufacture and now includes both left and right side. They no longer sell the sides sepratly and you will receive both left and right side int he kit.
Hope this helps!
21 people found this helpful.
Was this helpful?
Thank you for voting!
Doug
July 20, 2017
The pantry cover in my fridge will not open or close and I think its because of the endcap pin. Should I order that separately or does it come with the endcaps? Do I need to replace both end caps or just the pin?
Hi Doug, if your pin has fallen out you need to order this assembly to replace the pantry endcap. Please let me know if you have any further questions!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Meriam
July 20, 2017
I need to remove the endcaps and replace them and I purchased both endcaps but I’m worried about breaking the pin since that seems to be the most fragile part. Can you give me some tips on installing without breaking these pieces
Hi Meriam, there will be three screws holding the endcaps in place, removing those should be simple. Once that is done you can remove the attached parts put them on your new one, and replace your endcap. I hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Shelle
October 31, 2017
The left side of the deli drawer lid knob broke off..(the .lid hinge knob) not sure what part that is?
For model number GI6FDRXXY03
Hi Shelle, Thank you for the question. The pin that the lid swivels open and closed on is part of the end cap.The end caps come in a kit.This part has been updated by the manufacture and now includes both left and right side, PartSelect Number PS11738134. Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Karen
May 6, 2018
The tab has broken on the part (left side of fridge when facing it) right below the plastic see-through cover piece that comes up when you open the bottom drawer. I think i found the correct replacement piece, but just making sure. Please advise. Thank you.
For model number JFI2089AEP8
Hello Karen, thank you for your question. Yes, the end cap kit is what you would want to order. This kit includes both the right and left side end caps, and the pins which hold them in place. Good luck with your repair!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Bernie
July 20, 2017
Does this purchase include both endcaps?
Hi Bernie, yes, purchasing this pantry end cap kit W10874836 will have both end caps included. Best of luck with this repair!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Danny Wright
November 6, 2018
The little tab that holds "pantry drawer lid" in place on the ride side "pantry end cap" broke off. Two questions:1>do you replace the whole pantry end cap for just that little tab? 2>the right and left side are different but you only sell one. The right side has the temperature adjustment. Do i need to order a right side and if yes, i don't see it on the schematic.
For model number GI6SDRXXY02
Hello Danny, thank you for your question. The whole end cap is replaced not just the tab. The tab comes on the end cap. The right and left are different, but the part number PS11738134 comes as a kit now (both left and right sides). Per the manufacturer : NOTE: This part has been updated by the manufacturer and now includes both left and right side. I hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Eileen
March 28, 2018
The little pin on left hinge of chef's pantry drawer broke off. What part do i need to replace it? Thanks
For model number AF12538AEQ
Hi Eileen,
Thank you for your question. If it is the little pin that acts as the hinge for your pantry drawer door, then this is the part that you would need to replace. Your end cap kit. I hope that helps. Good luck with your repair.
