Refrigerator Crisper Frame

Through out broken plastic, replace with new one
to be replaced in a few years.

Easy repair here, the Refridge was purchased at a discount as a scratch and dent model. the damage was superfical and the parts orderd were simple remove and replace job did not take long at all to replace all parts.

Divider pantry: no tools required, simply pull out tray and remove old broken dividers and snap new divider in place.
Brace-Crisper: this takes a screw driver to remove. remove the crisper shelf and insert a screw driver to lift the plastic securing tab. slide out the frame brace and slide the new brace in place the plastic tabs will snap in to place and hold the metal frame in its position.
Grille, Toe: this grill snaps into place no tools required.
Bracket: this is the metal bracket for the front feet, there are 4 screws to remove and the bracket comes off the front of the refridge. unsrew the adjustable screw foot and screw the adjustable screw foot into the new bracket......install the 4 screws and you are done.
Trim-Shelf: no tools required simply pry the trim piece of with your fingers.....some may use a flat screw driver but this riskes scratching the trim piece. the new trim piece snaps into place.

Wife learned you can overload the cheese and fresh veggie trays and the plastic rails broke. Repair required removing parts from the old crisper frame -- no experience and no instructions. Had to study broken part and figure out how to remove parts. Released catches with a knife and, by trial and error, figured out how to install rescued components on new crisper frame with minor damage and frustration.

It was a very simple operation to replace the parts and required essentially no tools, just a small screwdriver to pry up a tab for removal of the chanel on the front edge of the frame. This chanel had to be removed from the old crisper frame and installed in the new one. In addition the crisper control" had to be popped out of the old frame and into the new frame. Most of my time was spent cleaning.

We joined a CSA (community supported agriculture) and we put too much of the veggies in the crisper. It broke the crisper frame and bar. Replacing them took less than 15 minutes. No tools needed.

Removed crisper drawers, removed glass, removed broken crisper frame, removed deli drawer cover, removed glass and removed deli drawer. Removed left and right pantry end caps and installed new pantry end caps. Re-installed pantry drawer, glass and drawer cover. Assembled new crisper frame with parts from old according to video instructions, installed center rail and installed new crisper frame . Re-installed crisper drawers and glass. The videos were extremely easy to follow.

These particular pieces just snap into position. Really could not have been any easier. Just glad I found PartSelect to get needed pieces.

I just watched the YouTube video that you guys provided and did it exactly step by step and it was perfect

followed vidieo instructiions and the job was easy and smooth, very satisfied

Removing the old pieces & figuring out how to separate the front trim so it could be reinstalled on the new frame took the longest! (released the securing tabs with a screw driver). Reinstalling the new parts were straight forward, "no problem". (epg)