Armature Assembly 16-01-3015

This is an Original OEM replacement Armature Assembly designed for use with Milwaukee Compact Hammer-Drills. This item includes an Armature, Fan, Armature Bearing and Commutator End Bearing. Due to constant contact with Carbon Brushes armature will eventually wear out and would need to be replaced. It is highly recommended to replace both Carbon Brushes when replacing an armature. Remember to be especially careful of the armature fan when you remove it, because if you break it, you will have to replace the entire armature. To replace this Armature you would need a Torx T10 Screwdriver to remove the Case.