2602-20 Milwaukee - Overview

This is a genuine Milwaukee replacement part, it is sold individually. The Milwaukee 14-46-2012 Brush Card Assembly uses four brushes, whereas most power tools use two brushes. To replace this part you will need to release the spring tension on the brush then place the brush card in its proper position. Worn brushes frequently are the...Read more cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This is a genuine manufacturer-supplied part that is made for use with Milwaukee hammer drills. It is a special screw that is utilized to secure the chuck. Commonly, screws may need to be replaced due to worth threads or a head socket. It provides an identical replacement for a missing or a faulty hardware that was included with a new uni...Read moret. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this screw. It is a left hand thread screw. Keep in mind this high-quality part is made of durable metal and is sold individually. NOTE: We have an article and a video on how to remove a chuck from a drill, here is the link to it. How to Remove a Drill Chuck

This is an Original OEM replacement Armature Assembly designed for use with Milwaukee Compact Hammer-Drills. This item includes an Armature, Fan, Armature Bearing and Commutator End Bearing. Due to constant contact with Carbon Brushes armature will eventually wear out and would need to be replaced. It is highly recommended to replace bo...Read moreth Carbon Brushes when replacing an armature. Remember to be especially careful of the armature fan when you remove it, because if you break it, you will have to replace the entire armature. To replace this Armature you would need a Torx T10 Screwdriver to remove the Case.

Charge the M18 and M12 Packs Sequentially 30/60 Minute Charging Time (CP/XC Packs)

This is an authentic manufacturer-supplied replacement field. It is specially designed for use with Milwaukee impact drivers. In conjunction with an armature, it is the central component of an electric motor. A field is usually damaged by overloading the power tool, or because of a bad armature. It is highly recommended to replace both ca...Read morerbon brushes when replacing a field. This high-quality item is sold individually. To complete this repair you would need a screwdriver. Make sure to refer to the appropriate diagrams for your model for the correct replacement procedure.

It is a genuine OEM sourced replacement screw that is commonly utilized on Milwaukee power tools. This screw is a standard hardware which will have multiple applications depending on the model of your too, please make sure to check appropriate diagrams for correct location and use of this item. This is a high-quality Torx screw that is made of durable metal and it is sold individually.