YKHMS1850SW1 KitchenAid Microwave - Instructions

Took the replacement plate out of the box and put it in the microwave in seconds. I never realized how much of a difference having the correct microwave plate would make. It's great to have it back.

I didn't do the repair -- my husband did, said it was easy, had no problems what so ever! The new bulbs give a lot more light to the cooking area.

Ordered the item on a Monday at 12pm and it arrived the next day. Amazing!

Unscrewed light cover then inserted lights. When I called your company gave them the model Number they knew the exact part needed promptly mailed the replacement lights.

Took out the screws and replaced the vent. (here is a trick, to make getting the screws in a rather hard to reach area I glued them to the end of the screwdriver-super glue)

Slide the old one out of the slot and insert the new one in its place.

You had alerted that it was imperative to unplug unit before starting to remove defective bulb. As described, there was silicon on bulb and socket and bulb broke upon my attempt to remove. Had to use needle nose pliers to get metal base of old bulb from socket, then all went well.

Easy, perfect

The part was shipped quite fast. I received it after 3 days of my order. Installing the part was a breeze. Took about 5 minutes. The part was as described and looked identical to the original one.

Attached bracket to wall with screws and hung microwave oven. Very easy project.

Remove the screws from the unit metal tabs. Insert two locator tabs of the grill into the slits in the unit and install the two mounting screws. SIMPLE

The problem I have with changing the bulb is my microwave is an overhead one and therefore I cannot tip it on its side to easily replace the bulb. I have to drop the lid down and carefully install the new bulb from underneath.

just replace need cooking tray

Simply placed new dish on the rotating hub.

Removed the glass cover and replaced the bulb. Very simple.