WRF555SDFZ14 Whirlpool Refrigerator - Instructions

It was great! Took my husband less then 5 minutes to fix. Your delivery time is excellent. This is the second time I order from you and would do so again if the need arises. Thank you so much. Don't be afraid people go ahead and order.

With 2 babies and a chaotic household, i failed to double-check the measurements before I ordered the part. No fault of partselect, just user error ;-) I had to return the part bc i ordered the wrong size. Lesson learned, take my time and make sure it's done right the first time. The part fit in perfectly.
I used the search feature on the left side of the website to find the part, since the deli drawer wasn't in the parts diagrams given. The second time, customer service helped me find the part since the correct part wasn't on the website initially.
The deli drawer for this model is in the perfect place to have something dropped on it time and time again. I'm surprised you don't get more requests for this part to be replaced. It's bad design for Maytag to make it out of thin plastic.
Anyway, thanks so much for your patience in dealing with this frenzied mom! :-)

Took the shelf glass out, pulled drawer out, put lid on put shelf back together. Everything fit and works well.

Checked Video online. Had to remove the 2 snap on track/gear covers. Pry out the gear with screwdriver and the gear bearing unit. Align the flat side of the bearing unit and snap in. Position the cut teeth on the gear to match original and snap into the bearing. Insert the connecting rod into the long shaft gear and then push back into the short shaft gear. The video said to remove the drawer front but I did not and don't see that it necessary.

Bought new cap.

I slipped the old door off its hinge pins and replaced it. Took thirty seconds.

Shut off water supply. filter is located in the upper right hand corner of the refrigerator on the inside. open the drop-down door. by hand pull the filter downward. then twist it to the left one quarter turn. it should pull out. I replaced it with a filter bypass plug. you can purchase a high quality filter to replace.it don't buy cheap filter.I made that mistake! hope this helps good luck!

Old part snapped out and replacement snapped right in - extremely easy and fast.

I slid the drawer lid from the pins by pushing in on the top sides of the lide and put the new one in by lining up the pins and holes and 'snap'.

I ordered the part, you shipped it quickly and I replaced it. I would absolutely recommend your company to anyone. I was very impressed. This is the second part I have ordered from you.

The repair was easy. chosing the right part required phone help. From the web photo of the part it is not knowable if the part includes the glass window. I had to call. Also I needed help if finding the correct part. But alls well that ends well. And the replacement was easy. Thanks for your interest in my experience.

Removed pantry lid,pantry drawer, shelf, two drawers. Unscrewed metal side rail. Removed right side end cap plus attached back rail. Had to figure out how to remove sliding drawer mechanism, not easy, all plastic, easily breakable-reattached that to new right side end cap. Put everything back (not easy-angle makes it hard). Reattached lid to new side end cap and all is well! My husband and I did this-for us it took two people.

removed the pantry drawer, pushed tabs holding the door, and door came right off. new door went on whole repair took no more than 5 minutes. Longest time took arguing with my wife on how the door came off, and she was right and I was wrong

no hardware, just fitted holes

pulled one side loose than the other. did the opposite to install new lid