All Installation Instructions for Whirlpool Microwave WMH32519HT08

None

Put in the charcoal filter buy taking two screws out and replacing.

Parts Used:

Charcoal Filter

Paul from SIERRA VISTA, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 16 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken turntable tray

Replaced tray. No tools needed.

Parts Used:

Cook Tray

Nelson from Orlando, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broke glass plate

Put new plate in and it was fixed

Parts Used:

Cook Tray

Thomas C from Reminderville, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Microwave had no electrical

I was sent the wrong fuse by you. I had to procure a fuse in another manner. Very disappointing. The repair was simple. It just took longer because of the failure to send the correct fuse.

Parts Used:

R Ceramic Fuse 20 A

Larry from HARKER HTS, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers

1 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

it was working fine and it stopped order a fuse and it wasn't the problem

took it to Buttermore appliance in Auburn Indiana and he changed the fan and added another fuse

Parts Used:

R Ceramic Fuse 20 A

Herb from Auburn, IN
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours

0 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Put the Fuse in, then plugged it in came on for a min then everything went out!!!!!

Took the front off and behind a plate was the fuse, so I replaced it for what good that did!!!

Parts Used:

R Ceramic Fuse 20 A

Stephen from SPRINGFIELD, WV
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers

4 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Microwave turntable stopped rotating.

1. Unplug the power cord from the wall socket. 2. Remove the 10 screws holding the bottom cabinet cover in place. The bottom cabinet cover will swing down allowing acces to the inside ofe the microwave. 3. Remove the connector from the turntable motor. 4. Use a T15 Torx driver to remove the 2 Torx screws holding the motor in place. 5. Remove the motor. 6. Reverse the process using the new motor.

Parts Used: