EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...
Models > WFG550S0LV1 > Instructions

WFG550S0LV1 Whirlpool Range - Instructions

All Instructions for the WFG550S0LV1
61 - 75 of 98
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Electric Burners did not work.
This is very easy The JennAire burner modules slide out very quickly. I was able to do both modules for $360 versus buying a new JennAir stove top for over $1200.
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Steven from Clarkston, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacement
Great service. Exact replacement unit. I recommend your company
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Francisco from Longwood, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burners not working
just plug in cartridge. Put one in looked so much better got a cartridge for other side. stove top looks new now.
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • richard from richland, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A cartridge (set of 2 electric burners) which I bought 6 months ago had a short.
1 phone call to PartSelect and I found out they warranty their parts for 1 year. They shipped a new one immediately.
Great service!
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Marilyn from Bloomfield Hills, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace Jenn-Air Coil Element
Removed the old unit and replaced it with the new
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Ruth from New Hope, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old cartridge burner plate connectors had failed
Simply bought a new cartridge, pulled the old one out and put in the new one. The best thing was that I used another cartridge bottom to replace the bad connectors on the still shiny top and then had two good looking cartridge tops.
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • John Davenport from Upper Black Eddy, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My stove is a 1985 model and the coils did not heat evenly any more.
When I called to inquire if a new cartrige would fit in my 1985 model range the gentleman walked me through unplugging the old cartrige to see how it connected. I did this while on the phone with him and I then explained the connection; he told me that a new cartrige would just plug into the same place....and it did!
You had a great person at your service desk.
Thank you
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Linda from Toledo, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners would not heat properly, and eyes could not be leveled.
Pulled old element out, cleaned electrical connector. Cleaned drip pan. Replaced with new unit. The new element was of a better design than the original. I will order second set soon to match.
Wife very pleased too.
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • William from Pauline, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
elements would not heat up
Disengaged the old cartridge and replaced with the new one ---simple as pie-----the real issue is that it was ordered and delivered with-in 4 days---in a well pack and insulated box---great service---
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • George from East Otis, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old element cracked
Simply pulled old element and plugged in the new one. The pattern of 3 flat spades and a round on the end of the element matched so it was simple.
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Scott from Walnut Grove, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
20 of 674 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wanted to replace the grill unit
removed the grill element and plugged in the new cartridge element. very simple
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Brenda from Jonesboro, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
22 of 691 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
needed a new coil element for my 20+ years old stovetop.
Plug in...done!
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Elissa from Fort Thomas, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
20 of 686 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large element on one cartridge & small element on the other cartridge
First of all, I could not believe how quickly I received the 2 new Jenn-Air Coil element cartridges!! It seemed like I had just ordered them and next thing I knew, Fed-Ex was ringing my doorbell to deliver them!! Also, I received both cartridge boxes at the same time so this was really great! My experience in the past in ordering two of one item is that the second item is usually shipped a few days later.

This was one of the easiest installations & repairs I have ever done! Given the age of the stove, the old cartridges had a burner on each one that did not work properly. Also, one of the cartridges was beginning to rust on the underside, due to age.

It took approximately 2 minutes to remove the old burner cartridges and install the new ones. All I had to do is slightly lift the lip edge of the cartridge and "unplug" it from the stove which merely entailed either moving the cartridge toward me or away from me, depending on which side of the stove I was replacing the cartridge on. Then, I just simply slid the cartridge into the appropriate plug in the stove. That was it!

I immediately checked all burners and I could not believe the difference! The burners immediately reached the desired temperature whereas the old elements that worked took a couple of minutes to heat properly. Now, the Jenn-Air looks like a new stove and is ready for holiday cooking!!! Thank you so very much for processing my order quickly. I will definitely order any future parts needed from your company. On a scale of 1 to 10, I give you an 11.
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • W.C. from Elberta, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
20 of 686 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner going out
plugged new one in
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • thomas from missoula, MT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
20 of 687 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problem, just wanted 4 burners instead of 2 + grill
This was a plug-in cartridge, so it really didn't need to be installed. However, as I unpacked it, I noticed that there was a blue plastic film sticking out from the edge of the underside. We had to take the cartridge apart to remove the plastic film. I didn't want to take the chance of it catching on fire.
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Marsha from SOUTH LAKE TAHOE, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
20 of 687 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WFG550S0LV1
61 - 75 of 98