Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WER211ES0 > Instructions

WER211ES0 Westinghouse Dryer - Instructions

All installation instructions for WER211ES0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dryer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the WER211ES0
256-270 of 438
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Timer knob broke

  • Customer: David from Las Vegas, NV
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Pushed new knob into place. This was the cheapest, quickest, easiest repair job ever.

loud metal on metal noise

  • Customer: richard from orchard beach, MD
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Replaced rear bearing on back of dryer. Repair cost $20.00 an a little time. Much better then buying a new dryer. It was easy to repair the video instructions were great. I would do it again it needed.

No heat to dryer

  • Customer: Renee from Coldwater, MI
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Your tutorial video of how to change out the heating element was so helpful, it gave me the confidence to tackle it on my own. It was so detailed, there was no worries of not knowing what to do. Everything was exactly as the video showed, and was very easy to replace this heating element. My wife was thrilled we saved money on doing it ourselves, and grateful to have the dryer working with 3 kids and a husband who works in concrete! Thank You to the Parts Select team for putting such a helpful site for people to utilize!

Dryer Squeaking

  • Customer: Gilbert from Elizabethtown, NY
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Found instructions on "UTube"some of the screws were in a different position but you can see them. While you have the dryer apart it's a great time to clean it and also as long as you've gone this far replace the belt,it's probably time.

I shut the door too hard, and the old latch fell down into the inside of the dryer.

  • Customer: Bret from Tampa, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The new latch easily snapped it into place.

Loud screeching noise until the dryer warmed up

  • Customer: Marila from Portland, OR
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
My order confirmation email had a "how to" video for installing the parts I ordered. I just watched the video, and the installation was ridiculously easy! We've put up with the obnoxious screeching noise for probably about two years, and with about $40 in parts and less than an hour of work time, we have practically a new dryer!!

needed to replace drum bearing

  • Customer: Jon from Jenkins, KY
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
took front panel off, removed access panel in rear to disconnect the belt from motor. removed top panel (this is a stack unit) take plastic rivets loose from lint trap, remove lint trap tube, pull drum out after slightly pulling up to dislodge drum from bearing cradle, Remove bracket and bearing from back of unit, clean parts of old grease (be carefull not to loose small ball bearing on back) Reassemble parts using moderate amount of new grease, put parts back together in reverse order.

No heat.

  • Customer: Werner from Eagle River, AK
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
The repair was easy. Skill level one task that anyone can perform.

Timer knob broke

  • Customer: Kama from Athens, WV
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I just put the new knob on. Took 2 seconds. Works great.

Dryer would not starr

  • Customer: Barbara from Muncie, IN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Unplugged dryer, Removed top of dryer, Removed electrical connection to thermal limiter, tested thermal limiter with meter and found that it was bad,removed defective limiter, ordered part, waited for part (1day), put new thermal limiter in dryer. reattached connections, put top of dryer back on, plugged in dryer, attempted dryer start up and it worked. Very easy because of the information I got on this site. Thank you

Dryer not producing heat

  • Customer: Thomas from Greenwood, IN
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Once the part arrived, I logged back into my order and watched the part installation video as I did the repair. The video was perfect, it made doing the repair easy and safe. Best part is I didn't end up with any extra screws which was good.

Dryer making scrubbing noise while running

  • Customer: David from Raven, VA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
This is a front load dryer. First unbolt top cover of dryer. Then unbolt screws and connections to control panel. Next unbolt all screws holding dryer door and front bottom panel. Next take belt off of drum and slide out drum from the front. From inside of drum remove 3 screws and remove bearing then put new bearing on and bolt up the same way you take old one off. Using an 8mm socket or wrench remove plastic bearing cage located at rear of dryer. When unbolting there is a retaining clip and small steel ball to be removed from back of dryer. Replace this the same way you take it off. He sure to grease the bearing cage then replace everything back from putting the drum in first to your last step bolting on top cover of dryer. Hope this helps anyone doing this repair.

worn bearing, squeaking, scraping sound

  • Customer: Terry from Lancaster, OH
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I have used this company twice now and both times have been a good experience. Would highly recommend!

Broken belt

  • Customer: Jim from Middleboro, MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Many thanks for the video you guys put together on replacing dryer belts! I didn't know how I was going to get inside the dryer. I had the dryer apart in 10 minutes! Had to wait a day for the belts to come in. New belt in and dryer running in 15 minutes! Thanks for running a first class operation!! Jim

Rear Bearing Broke, taking Heating element with it

  • Customer: Don from Salt Lake City, UT
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Did it just as the Video said to and had no problem other than it should have warned about a possible problem with the Drum drive belt going to pieces. I am very happy with PartSelect for the parts and the instructions, it all worked well for this "Old Man". Thank You p.s. My local Sears had the belt or I would have gotten it there too
All Instructions for the WER211ES0
256-270 of 438