The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dish...
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking,...
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
This filter works with the water pump in your dishwasher. It prevents debris from entering the pump and causing damage. As a result, the filter can occasionally become clogged or damaged, and will nee...
This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element.
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.00
In Stock
Questions And Answers for WDF330PAHS3
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
D
December 17, 2023
The dishwasher wouldn't heat up and I saw the heating element was burned through so I replaced it but it still won't dry the dishes. The water is warm but the dishes are still soaking wet. Should I get a new electrical board.
For model number WDF330PAHS3
Hi, thank you for the question. Control board can be the issue, but before replacing it, we would recommend checking the high limit thermostat, part number PS11743423. Glad to be of help!
Hello, my upper rack doesn't spray water. I wonder what would you recommend, please? Thanks,
For model number WDF330PAHS3
Hello Michael, Thank you for the question. If it is just the Spray Arm that attaches to the Upper Rack that is not spraying water, we suggest checking the Holes in the arm to make sure they are not clogged. We also suggest checking the Spray Arm Manifold to make sure it is properly seated in the Feed tube at the back of the tub so it is getting proper water supply. We hope this helps!
Once the dishwasher starts the cycle, it goes to the last stage draining and drying without going through a complete cycle. It takes like 15 min and the light remains on. We open, the soap is still there, the dishes are not clean but dry. We tried the diagnostic test( resetting the program) the clean button flashed many times and nothing changed. Please advice.
For model number WDF330PAHS3
Hello Hani, thank you for contacting us. The most probable culprits of the issue are a faulty overfill switch, part number PS11750031, and a defective control board, part number PS12704672. If the dishwasher is not getting enough water, the overfill is the most likely culprit. If this is not the case the control board needs to be checked. It manages the functions of the dishwasher such as washing, draining and drying. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Hi, I have Whirlpool dishwasher, the original when the house was built in 2019. The dishwasher will start running when the "Start" button is pressed. However, about half to three fourths of the way through the cleaning process, the dishwasher will flip the breaker and cut off in cycle. I am looking for information on what to troubleshoot and determine what is causing excess current to flip the breaker. Any suggestions is appreciated. Thanks!
For model number WDF330PAHS3
Hi Jeremiah, thank you for reaching out. Checking out the following parts may help you get to the root of the problem: the turbidity sensor, part number PS12070543, the high limit thermostat, part number PS11743423, and the control board, part number PS12070630. Good luck with the repair!
Dishwasher didn’t drain completely have to run emergency exit 2-3 times to get it to drain
For model number WDF330PAHS3
Hi Charles, thank you for contacting us. Based on our understanding, we would recommend checking the screen filter and the drain hose if it is clogged. If the filter is clean, then you may have a defective drain pump, part number PS11738151. You may need to replace the drain pump to fix the issue. Good luck with your repair!
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
unscrewed dishwasher from cabinet ...,moved out slightly....while door closed ...reached with long nosed pliers door spring pulled forward...and allowing white plastic part that fits through sleeve and fit new sleeve over it...pulled spring attaching white plastic part and pushed unit back to cabinet and replaced screws DONE.
