EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...
Models > TUD4700KB1 > Instructions

TUD4700KB1 Estate Dishwasher - Instructions

All Instructions for the TUD4700KB1
121 - 135 of 226
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Not cleaning like it should
Replaced old worn out parts with new ones.
Now it cleans like it should once again.
Parts Used:
Lower Spray Arm with Tower
  • Arnaud from FR SETTLEMENT, LA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two of the upper dish rack assemblies were broken
I had attempted to solve the problem with another company; but, the parts did not fit. So, when I found your company, everything was easy. I ordered the parts. removed the damaged dish rack assemblies, and, and replaced them with the new parts. The dishwasher works great again.
Parts Used:
Dishwasher Rack Adjuster
  • James from Odenton, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking
put new seal in and it still leaked!hum
Parts Used:
Dishwasher Door Gasket - Gray
  • Roy from matteson, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
1 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Will not dispense soap
Remove old spring pin, spring, door
Waste of time effort and money didn't change a thing still won't dispense soap to wash dishes
Parts Used:
Dishwasher Detergent Lid Spring Dishwasher Soap Dispenser Cover Dishwasher Lid Hinge Pin
  • D from Sadieville, KY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
2 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the rack adjuster broke, so when I pulled the rack out it would fall
Took the old part out and put the new part in..
Parts Used:
Dishwasher Rack Adjuster
  • Sarah from Grand Rapids, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Didn't look good with the new big panel changed.
Came home and my husband had it all done. He said it was simple and it looks bran new again. Very satisfied.
Parts Used:
Dishwasher Door Panel Insert
  • Marjorie from North Grosvenordale, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Long spring broke that pulls soap cup open
Opened the door by using a star screwdriver. Pulled the door inside from the outside. Located the broken spring, put in new one (be very carefull to see how the insides are put together..makes life ALOT easier), and carefully put back together.
Parts Used:
Door Spring
  • mark from ickesburg, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
5 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water in bottom of dishwasher
Disconnected power. Shut off water supply. Took off the front, disconnected copper supply line and flexible water line, removed water inlet valve. Took elbow from old inlet valve and put in on new one. Put new valve in, reconnected water lines, put back front panel. Opened water supply, Flipped breaker back on. Done and it worked!
Parts Used:
Water Inlet Valve Refrigerator Single Hex Head Screw
  • Chris from Pompano Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
64 of 457 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
top basket wheels worn out
used a common screw driver. took the ends off then pulled out the basket . used the screw driver to pop the brackets with wheels attached. new ones back on and about twenty minutes done. very easy.
Parts Used:
Dishwasher Rack Adjuster
  • Carl F from liberty, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
dish washer soap drawer would not work
we followed your instructions submitted via e-mail and they worked out just fine....thank you
Parts Used:
Soap Cup Latch Kit
  • matt from grant park, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Wheels on top rack broke
Watched online video and followed instructions
Parts Used:
Dishwasher Rack Adjuster
  • Joseph from Fort Worth, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
Broken door spring
The repair was very simple. Simply pull the dishwasher out far enough to access the springs, remove the old with pliers and install the new springs in the same spot as the old ones.
Parts Used:
Heavy Duty Spring Kit
  • Tom from Charlotte, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Dishwasher leaking in lower front door area
Removed and installed new door gasket which I found to be a simple task. Ran dishwasher and it still leaked. I then looked at other repairs submitted by your customers with the same problem. One had mentioned removing the lower spray arm and checking the screws around the pump. Sure enough, 2 screws were nearly ready to fall out and all others were loose. Tightened those, reinstalled spray arm, ran the dishwasher and no leaks. A big "Thanks" to you and also to other customers for sharing both their problem and how they were able to fix it. It sure saved me some money!!
Parts Used:
Dishwasher Door Gasket - Gray
  • James from Woodward, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken Wheel
I removed the top dishrack by removing the front clips(stops) on the tracks. Then I removed both tracks by removing the back stops. Then I replaced 7 wheels. Then I replaced the tracks, dishrack and the front stops. The whole job took about 20 minutes.
Parts Used:
Tub Wheel
  • Jagannathan from Centreville, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
There were no provided instructions, just had to wing it.
Trial and error. The spring was difficult to install, the pin and door were easy.
Parts Used:
Dishwasher Detergent Lid Spring Dishwasher Lid Hinge Pin
  • Earl from W St Paul, MN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the TUD4700KB1
121 - 135 of 226