Quick Question!

Have you ever purchased from PartSelect.com before?

Models > TFU17M6AW2 > Parts

TFU17M6AW2 Tappan Freezer - Parts

All parts for the Tappan Freezer TFU17M6AW2

Below is a list of all parts for the Tappan Freezer TFU17M6AW2 - Upright. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the TFU17M6AW2
1-14 of 98
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.46

KEY

This freezer door key is designed for use with most upright and chest freezers. It is an authentic OEM replacement part. Your appliance has a lid or door that locks and unlocks, th...

$29.24

Run Capacitor

The run capacitor helps the compressor kick on and off while maintaining a constant temperature in your fridge and freezer. You may need to replace your run capacitor if your refrigerator or freezer section will not start, if they are too warm, or if your refrigerator has become too noisy. Replacing the run capacitor is a relatively easy project. For this repair you will only need a 1/4 inch nut driver and needle nose pliers. Remember to disconnect the power and water supply line to the unit before you begin this repair. For full step by step instructions, simply click on the video below.

$46.35

Door Handle

This door handle is used for both refrigerators and freezers to easily open and close the door. If your handle is broken, loose, or damaged, you should replace this part to ensure ...

$7.82

Single Gasket Retainer Clip

This genuine OEM freezer gasket retainer clip is used on refrigerator freezers, and connects the inner door panel and door gasket to the outer door panel. The gasket is the rubbery strip that seals the space around the edge of the door to keep warm air out of the freezer. When the gasket is not working properly, you may notice an excessive frost buildup or reduced cooling. If the gasket is hanging loosely from the door, the issue could be with the retainer, or the clip fastening the retainer to the gasket, and it should be replaced.

$12.11

Handle Insert

This is not the handle. This is the decorative front insert. This part is for your freezer and is white in color. The insert measures approximately 10 inches long. This part is oft...

$5.58

SCREW

Sold Individually.

$8.97

Shelf Support - Left Side

This is a shelf support for the left side of a freezer. It is used to help support the inside of the shelf from both sides. *Please note: right and left side of shelf support are s...

$9.05

Shelf Support

This is a shelf support for freezers. It is used to help hold the inside of the shelf from both sides (left and right.) Please note: right and left side of shelf support are sold separately. If the shelf in your fridge is not leveled and is unstable, changing this part could be the solution. Make sure to unplug the refrigerator from the power source before beginning this replacement project and safely store your food. Follow the instructions in the diagram provided by the manufacturer for further instructions and guidance.

$9.42

Filter - Drier

A filter-drier in a refrigerator has two essential functions. The first is to absorb system contaminants, such as water, which can create acids. The second is to provide physical f...

$9.39

Door/Light Switch

This is a door/light switch and it is a replacement part for your refrigerator. This part is activated as you open and close your refrigerator door. When the switch is activated and the door is open it will turn the light on inside your appliance, and when you close the door the switch will deactivate the light. Before purchasing this part, you may test it for continuity to determine if your current switch is defective and needs replacing. This model is white in color and measures to be roughly one inch thick, almost two inches high, and almost 1.5 inches deep, with a male end plug.

$5.71

BEARING-HINGE

$8.57

SUPPORT-REAR SHELF

This part is found in freezers. The stud may have broken over time and may no longer be supporting the shelf. If your shelf is not staying in place or you are not able to adjust heights, it may be due to the support being broken. To complete this repair, you will need to open the fridge and remove the drawer and the shelf. To remove the old stud, you will need a 3/4-inch wrench to twist it off. The new part should push into place and will need to be turned with your wrench to be secured into place.

$8.38

Interior Drain Plug

$96.35

Door Gasket

This white door gasket is used to make an air-tight seal for the cabinet when the door is closed.

All Parts for the TFU17M6AW2
1-14 of 98