All Installation Instructions for Bosch Dishwasher SHSM63W52N

dishwasher door would not close properly, spray arm would not engage plug

popped off old spray arm from under the rack and put on new spray arm,
couldn't be any easier, 5 minute job, door closes easily now!

Parts Used:

Dishwasher Spray Arm

Brian from MADISON, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Filter-Micro was clogged with lime from hard water.

Replacement was fast and very simple. Was completed in less than 5 minutes.

Parts Used:

FILTER-MICRO

Peter from LEXINGTON, KY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Pump and heater failure!

Removed the dishwasher from the cabinet, laid it on its side, removed the old pump/heater, installed the new and reinstalled the dishwasher. What made this a little more difficult is my dishwasher has a bottom to it that would be very difficult to remove, access to the pump is from the side! I have large hands, not much room to work!

Parts Used:

Dishwasher Circulation Pump with Heater

Neil from CHESTER, WV
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Wrench (Adjustable)

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

The vinyl coating on one post on the upper dishwasher rack was damaged, which made the post start to rust rapidly.

The new rack arrived nearly ready to install. The brackets and wheels that connect the rack to the track in the dishwasher were already on the new rack when it was delivered. All I had to do was move some plastic parts from the old rack to the new rack. This is very easy and does not require any tools since the parts snap onto the racks. It's worth taking a moment to study the way each part is attached to the old rack before moving it to the new rack. Pay particular attention to exactly how & where the spray arm tube snaps to the rack. That tube took me two tries to get right. The whole operation took less than 15 minutes.

Parts Used:

CROCKERY BASKET

Douglas from KENDALL PARK, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

There was a roller missing from the lower washing rack.

There were 5 rollers still in place so I used them to show me how to snap the replacement roller in place.

Parts Used:

Dishrack Roller - Grey

George from STURGEON BAY, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 10 people found this instruction helpful.

Was this instruction helpful to you?

My flow tube had a hole in it

Initially, I received an E15 error. I evaluated for leaks but couldn't find anything except for water in the bottom of the dishwasher after about 30 minutes of the initial cycle. After discovering the hole in the flow tub, I order the part. It came a few days later & replace the part within a 15 minutes of receiving it. I didn't think it would resolve the issue but it did. Thank you!

Parts Used:

TUBE

Rick from LANDENBERG, PA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

WATER DRAIN MATRIX became plugged with sludge, stopping ventilation for draining function

removed machine so left side water drain matrix was accessible, replaced that unit, reinstalled machine to its built-in location.

Parts Used:

HOSE

WATER INLET

HOSE CLAMP

David from BURNSVILLE, MN
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Wrench set

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Over the years the filter became too clogged with embedded particles

Really simple. You pull out the drain filter plate and pull the filter off the support and replace. I gave everything a good cleaning and put it back in place.

Parts Used:

FILTER-MICRO

Jim from EDINA, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Wheels on the bottom tray broke off

The repair was extremely simple. Just lined up and popped them on. No tools needed.

Parts Used:

Dishrack Roller - Grey

Phyllis from BAYTOWN, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

The washer had an error message in the display of E:09. I called Bosh on customer srevice and she said that the heat pump was not working and needed to be replaced. Since the motor is the main part for this that needed to be replaced as well. The pars were under $200.00 total so we oted to fix this

We followed the video and had no problems with leaks at all afterwards. The parts fit perfectly and the machine is working great again.

Parts Used:

Dishwasher Circulation Pump with Heater

HOSE CLAMP

Claire from ALPINE, AZ
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)

5 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Four wheels on the lower dishwasher rack came off and got lost.

I bought replacement wheels.
I put them on the post, and they snapped onto the vertical post very easily. Job done.

Parts Used:

Dishrack Roller - Grey

james from PARSIPPANY, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

We accidentally damaged the upper spray arm

Easily removed the old one by carefully pulling it and repeated this procedure to replace it. Total time took less than 15 minutes

Parts Used:

Dishwasher Spray Arm

Sheldon from ROCKAWAY, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Water leaking and high pitch noise mid way through operation.

Mistakenly opened covers for the drain pump. Had to put those covers back in place.
Heater and pump installed easily with a bit of careful maneuvering the plugs and plug housing from the exterior. Pump installed in place easily. Clamp fit perfectly.

Parts Used:

Dishwasher Circulation Pump with Heater

FILTER-MICRO