RY402011VNM Ryobi Trimmer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Noise and wobbles during spin cycle.
Ordered the hub repair kit. I had much difficulty removing the agitator. It was stuck. Running the strap under it and tapping on the agitator assembly should've caused it to pop up but didn't. I had to ultimately strike it hard with a metal hammer. That released it but caused a hole in the agitator. The center metal gear on the agitator was very worn and rusty. I decided to also replace the agitator. I saved about $300 on the repair.
Parts Used:
-
William from SPANISH FORT, AL
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers, Socket set
3 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!