EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...
Models > RH22H8010SR > Instructions

RH22H8010SR Samsung Refrigerator - Instructions

All Instructions for the RH22H8010SR
1 - 7 of 7
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Water filter needed to be changed.
unlock filter with pliers with a turn to the right, pull out and replace filter, Turner new filter to the left until it click in.
Parts Used:
Water Filter
  • Arlena from CHICAGO, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
23 of 53 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice dispenser screw cracked
replaced ice "bucket"..snapped out old one, snapped in new
Parts Used:
Ice Maker Assembly 8-Cube
  • Ira from MANHATTAN BCH, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator was too cold - down to 18 degrees Fahrenheit.
Removed shelves. Removed back cover. Removed old sensor. Installed new sensor. Replaced back cover. Replaced shelves. Works fine.
Parts Used:
Temperature Sensor
  • Bill from RALEIGH, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
5 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer Door would not stay closed
Unplug electrical harness Took down freezer door , disconnected water lines, took out broken pieces and install new part and replaced door
Parts Used:
Upper Hinge Closing Cam - Left
  • Adriana from EDINBURG, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
6 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
We misplaced the mounting screws for our handles while moving.
It was easy! I just used an alan wrench to losen the side bolt, then slid the handle into the new mounting screws that I had hand-screwed and then tightened it all up.
Parts Used:
Handle Mounting Screw
  • Sara from BAKERS MILLS, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
5 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the RH22H8010SR
1 - 7 of 7