Models > RF26VACWPXAA > Instructions

RF26VACWPXAA Samsung Refrigerator - Instructions

All Instructions for the RF26VACWPXAA
16 - 29 of 29
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The french door would spring close or open.
I removed the old spring along with the sleeve and inserted the new one in its place. used a small screw driver to remove the sleeve and inserted the sleeve side in first. took 5 minutes..
Parts Used:
Spring PIN - French Door Mullion Spring
  • Ellie from Buckley, WA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not close properly
Spent a dollar 1.97 on the spring.7.00 on shipping and fixed it in less than 5 minutes.Fantastic
Parts Used:
Door Mullion Spring
  • Deryl from KINGWOOD, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken spring on french door
Placed lower spring leg in hole first. Manipulated upper spring leg into upper hole with needle nose pliers.
Parts Used:
Door Mullion Spring
  • John from CADILLAC, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door spring
replacing broken french door spring.
Parts Used:
Door Mullion Spring
  • Libor from Danbury, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Just follow instructions. Easy
Held spring with needle nose pliers and slipped into place
Parts Used:
Door Mullion Spring
  • David from NORTHWOOD, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door flap would not close properly
Show how to fix it on YouTube so that helped a lot. I ordered a new spring gave all the correct information and the spring was too big that showed up
lol so had to go to Plan B an modified the broken spring lol works great now
Parts Used:
Door Mullion Spring
  • Jeffrey from EAST HARTFORD, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bulb bracket broke
The website offered next day delivery on the 2 parts I needed. It was $30 dollars for next day but I wanted it fixed so I chose it. After a few days I revived no parts. I checked the website and saw the 2 parts were on back order, however they took my payment along with the $30 for next day delivery. Obviously I never got it next, or ever, so I cancelled the order. At least I got my money back.
Parts Used:
COVER-LAMP REF(BEST);AW,
  • Paul from BUENA PARK, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original spring broke
Used a pair of needle nose pliers and replaced the spring.
Parts Used:
Door Mullion Spring
  • Bill from AUSTIN, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spring replacement on Mullion Door
had to replace the spring on the Mullion door . the how to video helped however the demonstration shows putting the spring on in the opposite way that my door calls for, so just I turned the spring around and done, other than that easy as pie.
thanks
Chris F.
Parts Used:
Spring PIN - French
  • Chris from YORK, SC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door
Replaced the spring on my French door refrigerator
Was super easy
Parts Used:
Door Mullion Spring
  • Kathy from BUTTE, MT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
french spring broke
after receiving spring installed spring in seconds. Thanks partselect.com Ryan Cappell
Parts Used:
Door Mullion Spring
  • RYAN from RIVERBANK, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Brokjen spring
Lifted out the broken part and replaced with new spring.
Parts Used:
Door Mullion Spring
  • Sharol from Culdesac, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
French spring broke.
pushed new spring in.
Parts Used:
Door Mullion Spring
  • Andrew from Bensalem, PA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
6 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not making ice. Making ice slowly. Clicking sound when making ice.
(1) Set ice production to OFF from the front panel of the refridgerator. (2) Inside the fridge, remove the screw holding the panel covering the cable for the ice naker assembly. (3) Remove the panel. (4) Disconnect the power cable of ice maker. (5) Holding the assembly with one hand, release the locking clip of assembly housing, and slide assembly forward until it is free. (6) Remove the ice maker assembly. (7) Install the new assembly by reversing the previous steps. (8) Reset the ice maker by pressing the reset button and holding it for at least 8 seconds. The first time the ice maker is primed with water, there are 2 chimes. (1 High , 1 Low).
Parts Used:
Ice Maker Assembly Kit
  • Gregory from North Richland Hills, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the RF26VACWPXAA
16 - 29 of 29
Back to Top