RC548*T2 Hotpoint Range - Instructions

Very easy to replace. Oven works like new again. If you have even the most basic visual and mechanical ability, you will be fine to do this on your own. Total repair time for me was less than 5 minutes. The part was an exact fit!

Took the old one out, measured it, ordered the appropriate size, intalled the new one.

Removed bolts from fixing plate, pulled out existing element, unscrewed wire connectors and installed new element in reverse order of removal. This is an old stove from the 60's or 70's so I was glad to get a replacement part and fit it myself so easily.

I first looked at a video PartSelect had done on replacing the bake element in a stove. I disconnected the stove's power plug from the wall, removed the baking shelves, and removed screws holding the cover plate for the old bake element with a nutdriver. I removed the two screws holding the power wires to the bake element and replaced the bake element with the new element purchased from PartSelect. The cover plate was repositioned by using the nutdrive to tighten the cover plate screws. After reinstalling the bake shelves and plugging the oven back in, the repair was finished.

Ordered on monday and arrived and installed on tuesday. Works great!

Got on line, found the correct part and ordered it. The part came in about three days. Removed two screws and removed teh element. Two additional screws were removed from the power wires once the element was removed. Very simple to replace.

We just took out the old one and put in the new. Works great!!

Removed old element by unbolting two nuts, replaced with new element and two new nuts that were included. Very easy and worked fine.Wish all repair jobs were this easy!Great service with ordering and prompt delivery, too.

Took out the two screws that held the old element. Disconnected (unscrewed) the two power cords. Screwed in new power cords and put two screws in new element. Works like a charm. Took longer to get the new element out of the box than to replace it! Thank you!!!

Wasn't sure what to do had a friend come over and it was fixed in less than 15 min. The shipment was really fast and although I only had a partial model number because of age of the unit your search engine found it. Thanks all, my wife is very happy. Your the best!

Shut electric off to range[circuit breaker], removed door and baking racks, removed two screws holding element to back of the oven compartment, pulled the element out to expose the wires, removed screws fastening the wires to the element. Discarded the damaged element and installed the new one in the reverse order. Turned on power and tested. Everything worked fine.

DISCONNECT POWER !!!! Removed 2 screws to get element loose from rear wall of oven and 2 srews to remove wires. Reverse for installation. The replacement part fit perfectly and works just fine.

It only took 15 minutes and a nut driver to replace.The part was $22,well worth keeping my oven going for a few more yaers

Unscrewed the plate and unplugged the old element and plugged the new one in, screwed the plate back on. Done.

First we unplugged stove, if wired into circuit shut off in breaker box. Undo four screws on back cover and detach wires from element. Remove oven door by pulling open and sliding it up off hinges. Undo two screws holding element to back wall of oven. Slide in new element and replace screws in back wall. Replace door. Slide wire leads on new element in back, at this point we plugged range in and tested element to see if heating. It worked so we replaced cover, slide range in and leveled it with wedges. Time for pizza.