PVX7300SJ2SS General Electric Range Hood - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
New Range Hood not vented
This was an easy repair. The range hood was a GE 30" in Slate. Bypassing the venting option required installation of the charcoal filter. At first, the filter installation holes did not line up perfectly. But the filter is pretty much infinitely adjustable by rotating the adjustable ring. Note: the shipped part (charcoal filter) comes with no instructions for installation....but it is easily figured out by adjusting the rotating ring. The only tool needed is a #2 Phillips screw driver. An extremely easy repair, save yourself the extra money for professional installation.
Parts Used:
-
Walter from HARRISBURG, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lamp socket broke.
Pulled stove out. Turned switch off to hood lights. Checked power with power indicator tool, make sure off. Remove plate. Remove socket, cut wires, place wires in new socket . Replace plate.
Parts Used:
-
T from MACCLENNY, FL
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
3 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!