PNSF39Z01 General Electric Water Softener - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
by pass was leaking
Turn off the water. Loosen the connections to the pipes with the channel lock pliers. Take the old clips off. Make sure you order new clips, the old ones will break getting them off. Disconnect the overflow hose on top. Pull the old part off. Reassemble in the reverse order. Very easy job. Do not overtighten the connections, you will break them, just snug them up. Check for leaks.
Parts Used:
-
Ben from Seminole, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench set
Was this instruction helpful to you?
Thank you for voting!