PLDB998CC0 Frigidaire Dishwasher - Instructions

pulled out old seal replaced with new one very simple

took out the old racks, disassembled the top blade and put on new top rack and put new bottom rack in!
easy

Within 5min of running the dishwasher it kept leaking out of one side at the bottom of the door. I took out all the screws all to find out there was no need to do so. Although having it open I was able to find that the bottom door gasket looked dry rotted and was falling apart... after a little research online I was able to find that this is a common issue and I ordered the new part. The part arrived next day... all I had to do was slide it in where the old one was. It did the trick!!! No more leaks!

ordered new racks and replaced.. very easy way to order..prompt delivery. made my wife very happy..great xmas present..haha

I opened the boxes (which arrived VERY quickly! thank you) and exchanged the old racks with the new racks. The upper rack had to be re-fitted with the spinning spray mechanism, but, it was very easy to changed it from installation on the old upper rack to re-installation on the new upper rack.

It was all a breeze!

Orderd new gasket which arrived extremely fast, old gasket just pulls out , installed new one same direction as the old gasket fit, stopped leak. Thanks!

pulled the old gaskets out, put the new ones in. Just like that. No tools, nothing. I would compare it in difficulty to the process of paying for gas at the pump and then filling your car up.

I removed the screws around the top part of the door (from the inside side); carefully lowered the front panel down; unscrewed the old part; swapped the wires; screwed in the new part; and re-assembled the door. That was literally it -- 10 minutes and it was in and functioning better than it ever had with the broken latch. And the design looks so much more solid on this one.

The gasket didn't need to be replaced but I figured I'd do it anyway. It's a little harder than it seems like it would be, and in fact I spent more time on this than the latch itself, but it eventually went in and works just fine as well.

I hesitated for a long time because of the price, wondering if it was the right part. It looks very different in the actual latch mechanism, but it works perfectly. I wish I'd done this ages ago ^_^;;

I ordered ithe spray arm late on Tuesday night and received it Thursday morning. Much faster than I expected. I pulled out the old one and slipped in the new one and it worked better than it did before. The new one was a slightly different shape but worked fine. I am very pleased with the service.

Had a leak, due to the factory gasket was 1/2 " to short. Pulled out old one, installed new one, and trimed to fit. Took less the 5 minutes.

At 1st gasket kept going in to far, but after a few tries an my wifes help it went in. I had trouble with the adjustable legs as the floor was tiled an rasid up, but all in all everything went good. Ran it a few times on rinse. We're ready to go. Richard

I put the wrong bend in the door gasket first time. Be careful of the bend on the bottom right and left. Re did the gasket and all is well. The door latches more smoothly than before. The only problem I had was putting the panel back on. I have a new hip and squatting for a time becomes problematic. Would do it again!!!

Order the part here, it arrived in days, pushed it on it's base. all done!

This was the best price on the internet. It was delivered quickly and after removing 4 screws, I could access the handle. Was relieved that I had correct tool for screws inside. Removed handle and unhooked wires. Plugged wires into new handle and fastened. Replaced panel in door then popped out gasket and replaced. Started dinner, turned around and repaired dishwasher and then sat down to eat. I am A single mom and this was VERY simple to replace!

First I turned off the power to the dishwasher at the breaker box (after getting shocked once). Then I removed the 2 screws holding the handle latch unit on the door. I then removed the 4 wires in order and put them on the new unit in the same location on the new unit. Finally, I screwed the new door latch handle unit onto the door, replaced the front panel and turned the power back on at the breaker box. It worked immediately. Easiest appliance repair I have ever completed. Thanks for the easy instructions and direction!