This is a lower rack roller for your dishwasher. It attaches in the lower roller assembly on the bottom of your rack to allow the rack to smoothly slide in and out. This replacement part is 1.5 inches...
This is replacement door latch for your dishwasher. The door latch is attached to the tub frame, and connects to the door strike to keep your dishwasher door closed during operation. If you have a bro...
This mounting bracket is manufactured to secure your dishwasher to your countertop. Mounting brackets should be installed so the dishwasher doesn’t tip forward. You can fit the bracket to either the c...
This is a genuine GE dishwasher leveling screw. It operates as a leg on the bottom of your dishwasher, and can be screwed in and out to raise and lower the height of the dishwasher. It is made of meta...
This dishwasher latch strike is a manufacturer-approved replacement part for your appliance. The latch strike is an important component in your dishwasher door assembly, and adds an extra layer of sec...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Andrew
January 13, 2020
Dishwasher is not drying out the dishes
For model number PDT845SSJ2SS
Hello Andrew and thank you for writing.
There are several parts that could cause this problem. Here is the link to our repair help page, which also will explain how to check those parts for defects.
https://www.partselect.com/Repair/Dishwasher/Not-Drying-Properly/
We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Gary
March 30, 2023
This is a Profile model. The word Profile has been split for a while with the first "Pro" being shown upside down whereas "file" was normal in the readout. Now there is no readout at all and will not show or start anymore.
For model number PDT845SSJ2SS
Hi Gary, thank you for contacting us. You may need to replace the control board, part number PS12342779. We hope this helps!
It’s says it is washing but it makes a loud grumble sounds and that is it.
For model number PDT845SSJ2SS
Hello Rocky, thank you for reaching out. According to our research, a dishwasher makes this noise when it forces water down the drain. If the sound is very loud, check your drain pump. If it is defective, replace the drain pump, part number PS16217045, to fix the issue. Before replacing the pump, make sure all the dishwasher parts are properly connected and are not loose. We hope this information helps!
1. Turn off breaker supplying power to dishwasher in electrical panel 2. Open dishwasher door 3. Unscrew the screws that secure the dishwasher to the counter. 4. Tip dishwasher forward. Identify the non-functioning door latch. It looks exactly like the replacement. Unclip the wire harness from the door latch. 5.
... Read more On the inside of the dishwasher, there are 2 screws directly under the door latch. Unscrew them and carefully set aside. 6. Remove old door latch. 7. Set new door latch in place. Holding securely, replace screws removed in step 5. Toward the end they get a little tougher to screw in. 8. Plug wire harness into new door latch. 9. Re-align dishwasher and re-secure to counter in previous position. 10. Test latch to make sure it closes properly. 11. Turn on breaker in electrical panel. The dishwasher should now function properly.
Replaced transition piece, gasket, and vent cover. The root cause problem is that the factory installed gasket was too thick and would not allow sufficient thread engagement. The replacement gasket was about 25% thinner and worked perfectly.
the design of this part is easy to break when closing the top rack.
there is a hub that clicks in place and a spinner within this that makes the water spray evenly on the top of the tub of the dishwasher
the part broke when closing the rack [a dish too tall hit it]
it took less than 5 minutes to replace as
... Read more the part just clicks into two edge spots i did this without removing the rack or even looking into the tub all by feel