Replacing your General Electric Dishwasher DOOR VENT SEAL
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Haier.
Part# WD08X10092 replaces these:
WD08X23666
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.0
Filter By Rating:
5 Stars
3
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
1
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ernie S - August 29, 2022
Verified Purchase
Door seal did not fix leak
Unfortunately this part did not work for me. This was the third part I bought to fix the door leak And still have the leak which I have confirmed is coming from the door vent seal location.
November 7, 2022
left public reply: Thank you for your review. We're sorry to hear that happened, we will be in touch soon to help fix this issue.
★★★★★
★★★★★
Daniel V - April 18, 2020
Verified Purchase
Foam washer fixed my leaky dishwasher.
part fixed leak in dishwasher door
★★★★★
★★★★★
Kevin C - August 3, 2018
Verified Purchase
All fixed.
Part exactly as ordered.
★★★★★
★★★★★
KEITH M - May 1, 2018
Verified Purchase
Still in package
Finally got the door to stop leaking from the last great parts change. Not taking it apart to upgrade the vent seal not this year anyway. Cute lil party will stay in it's package until another rainy kitchen day
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Leaking under door
Since I have granite countertops, unscrewed 2 screws on each side of cabinet. Unscrewed the toe plate, unplugged the wire connector, and disconnected the cable from the door which was held by tie wraps. Pulled out dishwasher about a foot. Unhooked the spring cable to the door, lifted the door out and placed it on a spare table. Wit
... Read moreh door face down on a towel, I unscrewed the screws at the bottom to release the latches, then unscrew the screws that hold the door locked in place. Turned the door on its back face up, wedged a flathead driver to release the settings display, from the body of the door. Separated the 2 panels replaced the foam rubber vent seal. Placed the face face down, reconnected both pieces of the door together pushing down. Rescrewed the bottom to lock the 2 pieces together reinsert the hinges, screwed them in with nutdriver1/4". Grabbed the old gasket, replaced it with new one, sliding it into the groove on the bottom inside of door. Reattached the door to the washer, rehooked the cables to the door, retired with zip ties the cable to the underside of door, reinstalled the wire connector, and re screwed the toe plate. Pushed the dishwasher, leveled, rescrewed into cabinet. Replaced the tub gasket.
Dishwasher leaked because vent cover would not stay on
Replaced transition piece, gasket, and vent cover. The root cause problem is that the factory installed gasket was too thick and would not allow sufficient thread engagement. The replacement gasket was about 25% thinner and worked perfectly.
Ask our experts a question about this part and we'll get back to you as soon as possible!
9 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
October 16, 2019
How do you replace the door vent seal?I have already replaced the bottom seal and the tub seal and dishwasher still has a leak
For model number GDF610PMJOES
Hello Tom, thank you for your question. The inner vent cap is turned and unlocked from the inner door panel and removed. Once that is off. The inner door panel can be removed by take off the screws that hold it into place. Shut the door and remove the outer panel, then removed the screws that hold the control panel into place. Once that is removed slide the control panel up and off and carefully lay it down. The inner vent housing can be removed the seal replaced then the parts put back together in reverse order. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nathan
November 21, 2018
My dishwasher is leaking on the left side, a small amount of water on floor. What gasket seal kit would you recommend. Also, is the installation of kit easy to install?Thanks, nathan jilek
For model number GDT530PGD0BB
Hi Nathan,
Thank you for your question. You will need to replace the door gasket. The part number listed under your model number for the door gasket is PS11774412. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Greg
January 28, 2019
Unit is leaking by the door on lower left side. What gasket is needed and how difficult is it to install?
For model number GDT580SSF6SS
Hi Greg, thank you for your question. I have listed your door gasket for you down below. It is not very difficult to install these sort of parts. You just have to unscrew the screws holding your back panel to the front, then remove the gasket. I hope that helps. Good luck with your repair.
I replaced this gasket but i am still getting water leaking inside the interior of door and condensation is getting inside the control panel. How do i stop this?
For model number CDT835SSJ0SS
Hi Joe, thank you for your question. You may want to check all of the other seals on your door. Otherwise you may also want to check that your appliance is level. Sometimes when it is not level water can either leak or get into places where it should not be. Otherwise you may want to check your water inlet valve and your float switch to make sure that there is not too much water actually going into your appliance. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Edward
July 21, 2021
Show me the part # and description. Seal in rinse aid dispenser.
For model number Cdt835ssj2ss
Hello Edward, Thank you for the question. We do not have a part number or description of the Seal as it is not sold separate from the Dispenser, PartSelect Number PS12577530. We hope this helps!
My dishwasher is leaking on the lower left side. I ordered a WDO8X21894 door gasket and it doesn’t fit on door. The existing one was riveted in place. Please help
For model number GDT680SSH6SS
Hello Donald, thank you for your question. Check your drain hoses to ensure everything's securely connected (including the clamps holding the hose in place on either side) and verify your water inlet valve part PS12743161, isn't stuck, which could cause leaking on one side or the other. We hope this helps.
Was this helpful?
Thank you for voting!
Paul
November 25, 2022
The door vent keeps falling out and there is a leak sometimes in the lower left corner. Are these problems related?
For model number DDT596MJ2ES
Hello Paul, thank you for the question. Based on our research, both issues might be related. As the vent cover has a seal behind it, if the seal is damaged, there is a slight chance of leaking. You may need to replace the cover, part number PS8769905, and the seal, part number PS8688151. Also, you may need to check the bottom gasket of the door. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
Dishwasher is leaking lower right side. Already replaced the door seal. What can I do next?
For model number GDP615HSMOSS
Hi Sig, thank you for the question. Based on our understanding of the issue, we would suggest you check the drain hose, part number PS6011670, is properly installed, the tub gasket, part number PS11774412, and the water valve, part number PS12743161. We hope this sorts out your problem!
What part do i need to fix dishwasher that is leaking from the bottom left corner? It looks like the seal is bent in the corner causing it to leak.
For model number GDF510PGJ2BB
Hello James, thank you for inquiring. You may want to replace either the Gasket part PS11700870, the Tub Gasket part PS11774412, or the Water Valve Assembly part PS12342758 to fix this. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
