All Installation Instructions for PD24

Needed to replace the bent blades on my riding mower.

- Made the mower safe to work on the blades (remove spark plug wires, etc.)

- Raised the mower to get access to the blades, wedged a wood block against the blade.

- Used impact driver with socket to remove bolt holding blade.

- Removed blade, replaced with new, replaced bolt and tightened with impact driver, ..... and you know the rest.

Parts Used:

Lawn Mower High Lift Blade

Trace from LISLE, IL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

17 of 26 people found this instruction helpful.

Was this instruction helpful to you?

Take the wheel off. Place the key in the slot. Put the wheel back on.

Just described it.

Parts Used:

Lawn Mower Key

Gary from PILESGROVE, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

5 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Two striped out screw heads

Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.

Parts Used:

SVC-SCREW PHIL WAFER;83263,#8X3/8,DCT305

David from MCKINNEY, TX
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

3 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Broken v-belt for drive

I returned the belt because it was the wrong part. Ordered the correct belt from another source. After that the replacement went well and I crossed off Parts Select from my list.

Parts Used: