All Installation Instructions for General Electric Refrigerator MSK25GADAAA

Door closing cam desintegrated

Took the stuff out of the door
Removed the door
Replaced the hinge
Put the door back in
Put the stuff back in the door

You may be thinking that I'm not much for words - but this was SO EASY that it doesn't warrant using more words than I did.

My 7-year-old son helped me - it was a fun father-son project.

Parts Used:

Bottom Hinge Assembly

Daniel from Waterford, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Freezer Door Not Closing Completely

After reading other posted comments,I ordered a new hinge assembly set ps290199. My helper and I removed the door and laid it on the kitchen table. While he replaced the hinge on the refigator,I replaced the cam on the door bottom. We re-hung the door and completed the job in 15 minutes with the door closing like it did when new.

Parts Used:

Bottom Hinge Assembly

CLAUDE from TEXAS CITY, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

One cam riser on the bottom of the fridge door broke.

Remoed bottom hinge and replaced broken cam riser. Replaced Bottom hinge.

Parts Used:

Hinge Cam Riser

Jarvis from St Robert, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Door wouldn't stay shut. Cam riser was broken.

Emptied contents from the door. Removed top hinge cover (one screw) and top hinge (two bolts.) Lifted door off and replaced broken cam riser on bottom hinge. Put door back on.

Parts Used:

Hinge Cam Riser

Eric from Surfside Beach, SC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

lower hinge broke.

replace broken hinge.

Parts Used:

Bottom Hinge Assembly

David from Alexandria, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Wrench set

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

lower hinge frig side broke

Used (2) 2 x 4's as block and lever to raise door removed 2 screws and removed door used same socket to remove and replace door side of replacement part. replaced door. This is the second time I have replaced this part on frig. side. Very easy replacement.

Parts Used:

Bottom Hinge Assembly

Michael from Silver City, NM
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Refrigerator door would not close. Cam washer was laying on the floor in many pieces.

Removed the refrigerator door. Replaced the cam riser bushing on the bottom of the door. I then removed the hinge bracket on the bottom of the refrigerator after removing the grill (oh yuk, what a mess under the refrigerator). I put the new bracket on and replaced the door. All is working well again. Thanks for the hints and the parts.

Parts Used:

Bottom Hinge Assembly

Gail from Longboat Key, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

rt hand door wouldn't stay closed by itself-door sagged

This door was a problem for 1-2 years before I realized it had dropped about 2 inches. On close examination I saw that the hinge parts had completely broke down.
Had original manual-looked up model # on line under GE appliance and was surprised to find a large complete parts dwg showing parts I needed. Decided I needed the hinge assy.
Removed the door cap on top,replaced hinge assy and remounted door in reverse.--Works like new.

Parts Used:

Bottom Hinge Assembly

William from Los Angeles, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Door hinge on ref. side worn out,

My job pretty much paralled the no. one on this list,I am a retired industrial electrician and have many years experience doing similar jobs.Went very well. . Tom Pennington of Muncie Indiana

Parts Used:

Bottom Hinge Assembly

J T from Muncie, IN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

The refrig section door was not closing completely

Removed top hinge assembly to pull door away from bottom hinge (2x hex bolts) Discovered that the pin on the bottom assembly had broken off. Removed and replaced bottom hinge assembly (2x hex bolts). Aligned door with top and bottom hinge pins. Tightened all hex bolts. Done

Parts Used:

Bottom Hinge Assembly

Albert from SanJose, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

cam on door hinge broke

blocked up refrigerator door.removed old hinge, and put new one on,with socket set.

Parts Used:

Bottom Hinge Assembly

Jim from Beaver Falls, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

1 of 5 people found this instruction helpful.

Was this instruction helpful to you?

hinge assembly on refrigerator door needed replaced

It was really easy for me....my son told me what part I needed. I ordered it, and he installed it!

Parts Used:

Bottom Hinge Assembly

Marjorie from Akron, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Refrigerator door would not close completely

This is a side-by-side unit. After blocking up the closed refrigerator door to the correct height to match the freezer door, I removed the lower hinge pin assembly by taking out two bolts. Save the shims (my had two) for the new hinge pin. Then remove the cam riser from the bottom of the door by taking out two bolts. Install the new cam riser on the bottom on the door. Then install the new hinge pin assembly. Total time 15 minutes.

Parts Used:

Bottom Hinge Assembly

Joseph from Livermore, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Plastic cam on the hinge assembly was worn out and broken

I followed the many post on replacing this part and everything went well. I had a little trouble getting the hinge post into the new hinge assembly, but with a slight adjustment it fell into place. I checked to see what tools I would need to do the job and had them ready before I even started. I removed the door and had it back on in maybe 10 minutes and I am not exactly Mr. Fix It. The only advice I can add to what everyone else has said is you should look the job over a little before you take the door off and have your tools ready. Then you won't have the door off for too long. I'd like to thank this site and everyone who gave advice on how to fix this problem. It made the whole job very easy.

Parts Used:

Bottom Hinge Assembly

Dale from Knoxville, TN
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers, Socket set

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Again very simple to install. See below

I can not find the bill therefore I do not know what part I installed, as I keep installing parts in my home. I believe you are referring to a Vegetable Bin of my GE Refrigerator and you do not have to be a rocket scientist to install a new one.

Sorry
Abraham Zighelboim
PS: I just saw that was the Veg Bean

Parts Used: