Models > LWN204V

LWN204V Norge Washer - Overview

Sections of the LWN204V

[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Drive Belt - 51 inches long – Part Number: WP21352320
Drive Belt - 51 inches long
★★★★★
★★★★★
(25)
PartSelect #: PS11738882
Manufacturer #: WP21352320
This V-style drive belt measures 51 inches long and 3/8 inches wide. The belt is made to slip on the motor pulley to bring the basket up to the speed required. Continued use can result in the belt suf...
$10.98
  In Stock
Order within the next 3 hrs and your part ships today!
Lid Hinge – Part Number: WP35-2044
Lid Hinge
★★★★★
★★★★★
(25)
PartSelect #: PS11741780
Manufacturer #: WP35-2044
The lid hinge on your washer is connected to the lid and allows it to open and close. If you find you cannot open or close the lid to your washing machine properly, you may need to replace the lid hin...
$11.18
  In Stock
Order within the next 3 hrs and your part ships today!
Lid Hinge Pin – Part Number: WP35-2045
Lid Hinge Pin
★★★★★
★★★★★
(10)
PartSelect #: PS11741781
Manufacturer #: WP35-2045
This lid hinge pin allows a washing machine lid to pivot open and closed properly. The hinge pin may need to be replaced if the lid will not open or will not close. The part is white and made of plast...
$22.28
  In Stock
Order within the next 3 hrs and your part ships today!
Drain Pump with Pulley – Part Number: WP35-6465
Drain Pump with Pulley
★★★★★
★★★★★
(24)
PartSelect #: PS11741799
Manufacturer #: WP35-6465
This drain pump with pulley, also known as the washing machine drain pump assembly, is a pump with two ports. The function of this pump is to help expel water from your washing machine. The pump is ac...
$84.63
  In Stock
Order within the next 3 hrs and your part ships today!
Snubber Ring – Part Number: WP21002026
Snubber Ring
★★★★★
★★★★★
(16)
PartSelect #: PS11738845
Manufacturer #: WP21002026
The snubber ring is a piece that is specific to your washing machine. The function of the snubber ring is to reduce noise and vibrations within your washer. It fits in between the leg and the dome ass...
$13.11
  In Stock
Order within the next 3 hrs and your part ships today!
Transmission Pulley and Bearing Kit – Part Number: 12002213
Transmission Pulley and Bearing Kit
★★★★★
★★★★★
(16)
PartSelect #: PS2003651
Manufacturer #: 12002213
This transmission pulley and bearing kit, also known as thrust bearing kit or washer pulley and bearing kit, includes the pulley, washer, thrust bearing, two upper race washers, and one lower race was...
$69.83
  In Stock
Order within the next 3 hrs and your part ships today!
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.42
  In Stock
Order within the next 3 hrs and your part ships today!
Hose Clamp – Part Number: WP596669
Hose Clamp
★★★★★
★★★★★
(1)
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$11.80
  In Stock
Order within the next 3 hrs and your part ships today!
Screw – Part Number: WP489483
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11742755
Manufacturer #: WP489483
This screw is sold individually.
$13.09
  In Stock
Order within the next 3 hrs and your part ships today!
Screw – Part Number: WP3196164
Screw
★★★★★
★★★★★
(3)
PartSelect #: PS11740978
Manufacturer #: WP3196164
This screw is sold individually.
$7.68
  In Stock
Order within the next 3 hrs and your part ships today!
Hose Clamp – Part Number: WP285655
Hose Clamp
★★★★★
★★★★★
(2)
PartSelect #: PS11740613
Manufacturer #: WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$11.10
  In Stock
Order within the next 3 hrs and your part ships today!
Tub to Pump Hose – Part Number: WP21001915
Tub to Pump Hose
★★★★★
★★★★★
(7)
PartSelect #: PS11738836
Manufacturer #: WP21001915
Hoses are the most likely cause of clothes washer leaks. This tub-to-pump hose carries the water from the tub to the drain pump. If you notice that your tub is leaking during the wash cycle, check the...
$28.67
  In Stock
Order within the next 3 hrs and your part ships today!

Questions And Answers for LWN204V

Be the first to ask our experts a question about this model!

Common Symptoms of the LWN204V

[Viewing 10 of 10]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Burning smell
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing Fixing Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
No hot or cold water
Fixed by
these parts
Fixing
Show All
Spinning Issues
Fixed by
these parts
Fixing Fixing
Show All
Shaking and Moving
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
washing machine was making alot of noise
I found the water pump bearings were going bad from humidity. I replaced the pump with a new one and it runs quiet again.
Parts Used:
Drain Pump with Pulley
  • David from Boca Raton, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench set
561 of 571 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the plastic hinge pins brroke
I used a flat screw driver to push in on the releases so I could raise the top of the machine. I then used a torx tool to remove both parts of the hinge, and then used a #2 phillips screw driver, on the new screws I'd also ordered, to re-attach both of the hinge parts. Every thing went just as anticipated.
Parts Used:
Lid Hinge Pin Lid Hinge Screw
  • Allen from North Little Rock, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
512 of 515 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Load Grinding/Rubbing Noise in Rinse and Spin Cycles
First unplug the washer for the electrical outlet. You will need to tip the washer back to get to the bottom of the machine. There you will see the belt that drives the transmission and the water pump from the motor. Remove the belt and set it to the side. Then you will need to gain access to the top side of the machine by gently using a screwdriver to pry the front of the top up off the front panel on both sides then hinge it back out of the way. Use a nut driver to remove the two screws on the inside edge of the front panel and remove the front panel. Once the front panel is off you will see the water pump on the right hand side as you face the front of the machine. Remove the hose clamp on the water pump with the flat head screw driver or nut driver and use a pair of pliers to remove the compression clip on the water pump. Remove the 4 bolts holding the water pump in place. Reverse the entire process to put it back together. This job was very easy and I was only without a washer for 2 days because of partselect.com.
Parts Used:
Drain Pump with Pulley
  • Doug from Port Richey, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
139 of 151 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!