Models > LRSXS2706W > Instructions

LRSXS2706W (ASWCNA0) LG Refrigerator - Instructions

All Instructions for the LRSXS2706W

Evaporator fan making noise

Turn off the power to the refrigerator. Remove the back plate. Unplug the fan motor. Remove the fan housing and pull the fan blade from the motor. Replace the motor by removing 4 screws. Replace with the new motor and reinstall the fan blades. Secure the fan housing, plug the fan motor, and screw on the back panel. Plug and go!

Parts Used:

Refrigerator DC Motor Assembly

Tom from COPPER HILL, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

7 of 13 people found this instruction helpful.

Was this instruction helpful to you?

ice tray froze in place and motor broke tray and gear in motor

shut off ice maker in door and removed bin and top cover, removed two bottom screws and middle screws and loosened top screw and assembly pulls uot from the bottom and unplug the unit. After the new ice maker unit is installed turn on the ice maker to highest setting for 24 hours and throw the ice away. then reset for maxium ice making for the next 24 hours and you have a bin full of new ice

Parts Used:

DISPENSER ASSEMBLY,ICE

Thomas from Seaford, DE
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

I needed a new gasket

I didn't because the part was never delivered.
The box was apparently damaged according to the tracking.
Your company didn't bother to communicate that they couldn't send another one without a new order.
They also didn't give a refund until I contacted them because they are just too busy.
Your company was a huge waste of time.
Publish that. Go ahead.

Parts Used: