LRSDS2706S (ASTCNA0) LG Refrigerator - Instructions

Turn off the power to the refrigerator. Remove the back plate. Unplug the fan motor. Remove the fan housing and pull the fan blade from the motor. Replace the motor by removing 4 screws. Replace with the new motor and reinstall the fan blades. Secure the fan housing, plug the fan motor, and screw on the back panel. Plug and go!

Refrigerator door needs to be open all the way and still you have to squeeze to glass shelf in to place. It needs to go in straight and make sure the placement is correct. It may seem like it doesn't fit but it does, it is very, very tight.

shut off ice maker in door and removed bin and top cover, removed two bottom screws and middle screws and loosened top screw and assembly pulls uot from the bottom and unplug the unit. After the new ice maker unit is installed turn on the ice maker to highest setting for 24 hours and throw the ice away. then reset for maxium ice making for the next 24 hours and you have a bin full of new ice

I didn't because the part was never delivered.
The box was apparently damaged according to the tracking.
Your company didn't bother to communicate that they couldn't send another one without a new order.
They also didn't give a refund until I contacted them because they are just too busy.
Your company was a huge waste of time.
Publish that. Go ahead.

Remove old shelf and basket first. Remove shelf in door, to give you more room. Carefully slide you glass shelf in. Go slow and be patient, it's very tight. I was nervous it was going to break putting it in. Must go at it straight and level. Install basket below into track, very simple. The shelf fits but extremely tight!

Remove push plate for water/ice maker switch, remove 2 screws and 2 wires for switch. Replace with new.