KHM5APWH7 KitchenAid Mixer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Beaters bent
I just snapped in the new beaters and turned it on and they worked perfect. It was a very easy repair.
Parts Used:
-
Kathy from Brainerd, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
New beaters for my hand mixer
I love to bake...wash dishes, not so much! I ordered two sets of mixer beaters so I could cut back on the amount of washing beaters between batches. Please feel free to use and share this information.
Parts Used:
-
Judith from Saint James, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
beater broke
Pushed the new ones in - no brainer repair - I just want to say thank you for the prompt service
Parts Used:
-
Alicia from Lansing, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
One of the tines became loose.
-
Judy from Northwood, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Beaters Didn't Fit
I thought this fix would be a cinch, but when I tried to insert them into their respective slots neither beater could be fully inserted to the necessary 'clicked' locking position.
Parts Used:
-
Michael from Seattle, WA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old Beater had a broken blade
Ordered a new set of Mixer Beaters from PartSelect drawing info. They arrived in a timely manner. Seem to be a stronger blade and the beater is a little longer than the old. Good operation.
Parts Used:
-
Donald M from Palm Coast, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
One beater came loose from the shaft
-
John from Merced, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
beater came loose at shaft
when mixer was about 1 year old. Complete beater mechanisum cane loose from shaft. Mom was in the middle of baking some cakes, so I took the shaft and beater down to my garage and drilled a straight hole through the beater collar and shaft the threaded it through and installed a screw which after installing I peened over the ends so it wouldnlt come loose. Thie repair lasted longer than the original part by a lot of years. Now the beater became loose on the shaft and was woobelng so I bought a complete new beater assy.
Parts Used:
-
william from pittsburgh, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!