KGCC566HWH2 KitchenAid Cooktop - Instructions

removed old electric cooktop and install gas line and gas cooktop and change from natural gas to LP remove and replace orifice with new ones from kit, my cooktop called for 2 black orifices in the two small burners but did not come in the parts kit that I orded so I used 2 red orifices and it seems to work just fine.

With no inctructions removed the counter top burner tried to figure out how to remove the glass. Next removed the burners (remember to place the burnersin a open area in the exact order you remoned them from the stove)The burners are not the same. Now the glass was acessiable to remove. The switch harness was easy to replace. Removed one switch at a time noting how the harness was routed.Remember the stove is upside down. First remove the rubber dirt sheild and washed each sheild. Note the key way on the gas adjust shaft there is a knotch on the switch that must be located and pressed in to place. Complete the 5 switches noting not to remove the termination of the harnes until the very last step. That connects to the main power. I had to cut a wire tie and replace to complete the process. Removing a burner takes a star bit to unscrew the burner from the stove top.