All Installation Instructions for KitchenAid Dishwasher KDFS424SJP0

Split tine row

Removed broken tin row. Replaced with new tine row. Tokk less than 1 minute.

Parts Used:

Tine Row

Janet from MIDDLEBORO, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

RH door hinge came off

Turn off water and disconnect water line.
Pull dishwasher out as far as possible.
loosen both door hinges, with a helper holding the door at an angle.
Disconnect connecting wire between hinges.
Remove and replace left door hinge. Then remove and replace the right hinge.
Reconnect every thing, turn on water.
Hinge is a poor design. Ours had grease on the spring and it had slipped off the connection.

Parts Used:

HINGE ASSY-LEFT

HINGE ASSY-RIGHT

John from WARRENTON, MO
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Part in the lower rack had rusted out

There was no tools involved the part popped right into place. I received the part within two days from the date placed. It was great.

Parts Used:

Tine Row

Janet from Hollister, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Owner lost parts. Reordered them.

Cut DW brackets to size, attached to DW. Bent back tabs, pushed DW into place and installed screws.

Parts Used:

CAP

Dishwasher Mounting Bracket

DANIEL from STAMFORD, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

installer from lowes di not do it right, forgot to put scew in, instead he used shims, as usuall no more installs from Lowes

followed directions, a kid could have done it,

Parts Used:

Dishwasher Mounting Bracket

Joel from ROLLA, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

4 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Tine on rack was rusted and needed to be replaced.

Just replaced it in the notches that held the rusted tine.

Parts Used:

Tine Row

Jeanne from FAYETTE, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Bought lower rack, but discovered we didn't need it. Ordered the tine rack instead.

Our experience was amazing. The part itself simply needed to be replaced: dropped into the lower rack and it was done. The amazing part was the wonderful service that this site provided. We discovered our initial mistake, contacted the company, and received instructions for how to return it. Then we ordered the tine and it was sent immediately. Just received confirmation that the returned lower rack had been received, so the process is complete to our great satisfaction. This site really has it down for providing excellent customer service. They are terrific!! Thank you!

Parts Used:

Lower Dishrack

Susan from Bath, ME
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Warranty Service lost the two screws that held the cover below the door in place

It’s great when you have parts that fit and a schematic to go by. I got both from this site. There are three parts that these screws hold in place. Use the schematic to see which way each part is facing. Line all the parts up and then look through the covers. You’ll see pre drilled holes on either side of the cover. Line the screws up to the pre drilled holes. Put the first screw in half way then insert the second screw all the way. Come back to the first screw and tighten it all the way. Two screws, two minutes and I was done. Real easy repair, just awkward as you are on your belly on the floor. I used a drill with a socket that fit the screw head.

Parts Used:

SCREW

Joseph from Sterling Heights, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Dishwasher would not completely drain e1 f9 error

Pulled the dishwasher out from under counter - removing 2 screws accessible on sides of dishwasher - these screws hold dishwasher under counter. Drain pump accessible right side bottom. Disconnect wiring clip - grab pump turn counter clockwise 1/4 turn and pull out of housing. Then reverse this process for installation

Parts Used: