Models > KBMS1454BBL0 > Instructions

KBMS1454BBL0 KitchenAid Microwave - Instructions

All Instructions for the KBMS1454BBL0

Replaced broken glass cooking tray

I took the new try out of the box and placed it on the turntable and I was DONE! Took about 10 seconds. The delivery was speedy as promised. I will definitely order from this company again for replacement parts.Very good customer service and communication.

Parts Used:

Microwave Turntable Tray

Lyn from Sonoma, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

LCD display lost some lighted bars that form the numbers

Removed microwave from wall (it is a built-in). Removed top of cover. Removed 4 screws that held the front panel. Pulled front panel out. Unclipped LED Display from holder. Unplugged the 2 flat cables. Removed old Display. Inserted new Display. Clipped Display in place. Plugged the 2 cables. Reinstalled front panel. Reinstalled cover. Plugged into outlet and tried it out. Viola! Reinstalled into wall.

Parts Used:

Microwave Led Display Board

Ken R from Eagan, MN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

The shaft on the turntable drive coupler was longer than the original one that was broken..

All other measurements were similar and fit properly. The drive shaft of the coupler was TOO long by about 3/16". I had to cut it down to the size of the original OEM shaft using a fine cut hack saw. Seems to work perfectly now....

Parts Used: