JVM1533BD004 General Electric Microwave - Instructions

placed plate on carousel

After reading reviews that there was no power what so ever and a fuse replacement will solve the problem, I tried it. Replacing the fuse is very easy (and I am not handy at all). All you have to do is remove the microwave cover from the top by removing two screws, slide the cover to the left and pulling the cover off. Then remove the grill in front of you, by removing one or two screws. The fuse is in front of you, use pliers and be firm but gentle. Replacing the fuse is easy but it did not solve my problem.

Just like the directions said. Very simple.

Placed the new tray in the microwave.

The hard part I thought, was to find the part I needed. Not so with Part Select. It took less than a minute to find and order. The new part showed up in a few days. I noticed the new part was a little differant in a good way. The socket porition was a little deeper making it a little better. The microwave works great now.

It was REALLY EASY finding the right parts using your diagrams..Thanks for your HELP!!I will definitely be back.Dan H

Took off cover , unpluged switches , took off switch assy, off/on test hooped and howlered for about 5 mins .Then laughed about other sites said could get those switches. Just wanted to say I LOVE Partselect. Super fast del , great price. JUST AWSOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Very easy replacement. Just lift out and replace with a new one!

simply replaced filter

Removed cover, diagnosed problem, ordered part from Parts Select, received part in 2 days, replaced part, tested and replaced oven into built in space.

I only had to snap the parts into place

Removed the door and took the door inside frame apart, the ridge holding the outside glass had broken. After getting the new door pannel simply put door back together.

First unplugged the microwave, took top grill off, took control panel off, took wires off and used color coded tape to make sure they went back in right places, took fuse out and replaced it and put every thing back and it all worked fine and to top it off my wife did it all. So it was pretty easy.

To replace the broken latch (which rendered the microwave inoperable), I used a flat head screw driver to pry the plastic surround off of the inside of the microwave door. Then used the same screwdriver to pry off the metal inner apron--BE CAREFUL, when the metal apron pops off, the door glass will slip down. Latch itself easily popped into place. We took advantage of the repair to give micro a thorough cleaning--consider ordering filters when ordering parts to save on shipping. Repair was much easier than trying to locate an over-the-range micro to fit in same spot and latch itself was <$5.00.

Took item from sealed box and removed protective bubble wrap. Placed tray in microwave, aligning tray with turntable sprockets. Perfect fit, perfect match! And the part arrived in three days and was very competitively priced. What more is there to stay? Will use PartSelect for other replacement parts. No brainer!