JRP28BJ4BB General Electric Range - Instructions

Unplugged the appliance for safety. Removed two 1/4" screws that held the assembly in place. Carefully removed the wire guard that retains the glass shield. Unscrewed old light bulb and replaced with new part. Reversed the steps after cleaning glass cover.

Snapped in the clip

I had to call for a appointment for repair with GE Appliance because I thought then it . .was something electrical. The technician came out & checked everything out, turned out it was not electrical, The technician went out to his truck got a light bulb from his truck, put it in & it worked. It cost me $121.00 for trip charge from GE appliance for a light bulb that worked, your light bulbs were defective twice. Very disappointed with your products, cost me alot of money for a good light bulb thru GE appliance

Simply inserted the clip into the hole in the oven. It took less than 20 seconds. :D

I ordered the replacement clips from this site and they arrived in a timely manner. The clips were perfect, but due to the age of the oven, the holes had elongated and the new clips kept falling out also. I modified the clips by widening the tips with a pair of pliers. They are holding just fine. I don't think the older clips could've withstood the modification.

All I had to do was pop the clamp on the top part of the heating element and push the clamp into the hole.

replaced lights in refrigirator and freezer

I just took the old oven racks out and put new oven racks in.

Parts Select is the only parts place I found on the internet that had what I needed on my first purchase, so when I needed these clips I naturally went back to them. Product was easy to find, price was fine, receipt for payment quick and more importantly receipt of item was super quick. Thanks to the efficiency of this place and my old appliances, I will continue to go to them as needed.

It was fairly difficult. I pulled out the old racks and put in the new.

0. As a safety precaution, unplug the range or hit the relevant fuse breaker before you start. You might also want to grab a flashlight. Definitely do not try to do this while the oven is hot.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap.
3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.

No tools needed, the cap is just held in place with pressure from the wire.

Turned the wire protector to the side. Turned out the old bulb and replaced it with the new. Turned the wire protector back in place and I'm like new.

I watched a video of a similar model to familiarize myself with the required steps needed. I opened the back and disconnected the power cord and ground wires connected to the removable socket I then removed the lightbulb and removable socket from the oven interior side. I then removed the defective light socket cup and replaced it with the part I purchased. After replacing the removable socket and lightbulb, the bracket holding the light cover functioned perfectly with the new light socket cup. Final steps were to reconnect the power and ground wires to the removable socket. I then replaced the back cover over the light socket cup area. One word of advise. Be very careful when removing and reconnecting the cables to the removable light socket.

1. Find breaker and turn power to oven off
2. Set resting platform in front of oven
3. Open oven doors 25° and lift up and off
4. Remove wall mounting screws
5. With assistance, pull oven 75% out from wall and rest on platform
6. Remove screws from control panel and tilt it forward
7. Place flat bladed instrument behind the control nob and gently pry it off the front of the panel. It is held in place with a friction spring
8. Remove two screws holding thermostat to panel
9. Follow thermostat wire to side of oven, remove screws holding metal wire protection plate to side of oven
10. Locate thermostat probe in lower oven, squeeze clips to detach from oven wall and remove probe from clips
11. Push thermostat probe out through oven wall, pull the wire up and out the top of oven control panel
12. Open new thermostat and unspool thermostat wire. Set the thermostat next to the old one, and feed the probe wire out the side same as previous wire
13. Move each control wire, one at a time, from old thermostat to same prong on new thermostat. Toss old thermostat when done
14. Attach thermostat to control panel with the two screws, then slide the nob back on
15. Carefully feed the thermostat probe back through the wall, the insulation, and into the lower oven, attach it to the clips, and the clips back to the oven wall
16. Careful not to pinch the wire, replace the wire cover, push excess wire into the control panel housing
17. Replace all control panel screws
18. With assistance, push the oven back into the wall and replace the wall mount screws
19. Slide the doors back onto their support arms
20. Turn power on and test oven controls

Quick and easy, thanks!