All Installation Instructions for Jenn-Air Microwave JMV9186WR2

Put the Fuse in, then plugged it in came on for a min then everything went out!!!!!

Took the front off and behind a plate was the fuse, so I replaced it for what good that did!!!

Parts Used:

R Ceramic Fuse 20 A

Stephen from SPRINGFIELD, WV
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers

4 of 18 people found this instruction helpful.

Was this instruction helpful to you?

2 burned out bulbs under the microwave/important light source for kitchen stove.

I didn't do the repair -- my husband did, said it was easy, had no problems what so ever! The new bulbs give a lot more light to the cooking area.

Parts Used:

Light Bulb - 40W

Ferol from San Antonio, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

replace filter

Time to replace the charcoal filter

Parts Used:

Charcoal Filter

Robert from Southfield, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Noisy turntable motor

Unplug microwave. Remove turntable and support from inside. Remove outside bottom cover (10 screws). Remove 2 torx screws holding motor in place. Remove 2 wires from motor, noting colors. Wires are held with spade connectors that has a small tab that needs to be depressed. Remove washer from motor and place on new motor. Entire procedure very easy.

Parts Used:

Turn Motor

Bruce from Rock Island, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Needed a clean filter

Stood on a step stool (microwave over stove), took off the one panel,removed old filter and put in new one

Parts Used:

Charcoal Filter

Ethel from New Berlin, WI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

replace filter

slide into place under hood

Parts Used:

Grease Filter

Barbara from Cranston, RI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Bulb burned out

You had alerted that it was imperative to unplug unit before starting to remove defective bulb. As described, there was silicon on bulb and socket and bulb broke upon my attempt to remove. Had to use needle nose pliers to get metal base of old bulb from socket, then all went well.

Parts Used:

Light Bulb - 40W

Lester from Mesquite, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

A glass fell out of pantry onto glass tray and broke it.

I called the repair/parts number to make sure I had correct parts and the young lady instructed me as to the size of the serving tray; within 48 hours we had the VERY carefully wrapped carton opened and back in the microwave, working perfectly. Thank you. We'll recommend you to our friends!

Parts Used:

Glass Cooking Tray

Al from Torrance, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Burned out light bulb

Replaced light bulb.

Parts Used:

Light Bulb - 40W

Ray from Gatlinburg, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

replace light blub

removed grill cover, removed bulb plate, unscrew bulb, screw new bulb in socket,put bulb cover back on and screw grill cover back on. no issues whatsoever.

Parts Used:

Light Bulb - 40W

roger from palm coast, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Glass cooking tray for microwave cracked.

All I had to do was lay the new tray in the microwave. Easy as pie. Also, the new tray arrived very quickly.

Parts Used:

Glass Cooking Tray

Sharon from Kannapolis, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

turntable was making noise

We took out 10 screws on bottom of microwave. Removed turntable motor. Determined motor was bad by turning and listening while it was turned by hand. Bought motor online. 2 days later motor arrived and we installed it...EASY BREEZE Microwave works GREAT....

Parts Used:

Turn Motor

Patsy from Gloucester, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Replace filters

For grease filter, just slipped it in outside area. For charcoal filter, unscrewed the top of microwave and replaced existing filter, then screwed back the top.

Parts Used:

Grease Filter

Charcoal Filter

David F from BONITA SPRINGS, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

The capacitor was melted in the microwave

My husband open the microwave and see the capacitor melted. He try to find the piece in store,but unfortunatly he didn't find any. I found the piece on the web and ordered it. My husband replaced the part easily. The microwave work very well.The microwave was to our friend. He did replace it by a new one. Now we have a new microwave with a fan.

Parts Used: