JGP933BEK1BB General Electric Cooktop - Overview
Sections of the JGP933BEK1BB
[Viewing 3 of 3]Keep searches simple, eg. "belt" or "pump".
Grate Foot
PartSelect #: PS2353327
Manufacturer #: WB02T10461
The Grate Foot is a black rubber part which attaches underneath the grate in order to protect your stovetop from being scratched, which it does by cushioning the grate on your gas range. If this part ...
$16.09
In Stock
Top Burner Spark Electrode
PartSelect #: PS952858
Manufacturer #: WB13K10014
The top burner spark electrode, also known as a range surface burner igniter, is designed for use in your gas range. The function of this part is to provide the spark that lights the surface burner. I...
No Longer Available
Burner Head - Medium - 9500
PartSelect #: PS1020327
Manufacturer #: WB16K10055
This burner head, or surface burner, is used in ranges and ovens. The burner sends gas through the holes and slots to create an equal flame across the cooking area. If the gas igniter glows but will n...
$82.45
In Stock
Burner Head - Large - 12K
PartSelect #: PS1480992
Manufacturer #: WB16T10046
This large surface burner head is designed for use with gas cooktops and ranges, delivering consistent heat output for everyday cooking. Rated at 12,000 BTUs, it distributes gas evenly through precisi...
$64.85
In Stock
Small Burner - 5K
PartSelect #: PS3486550
Manufacturer #: WB16K10070
This genuine small burner is an original replacement part from GE, designed for use with a wide range of gas ranges. Positioned between the rangetop and bracket assembly and the burner cap, it plays a...
$56.05
In Stock
Spark Igniter
PartSelect #: PS11736298
Manufacturer #: WB13X27058
Also known as spark electrode. This part helps your burner ignite and produce flame.
$66.19
In Stock
Top Electrode Mounting Clip
PartSelect #: PS3510420
Manufacturer #: WB01K10112
This Genuine OEM GE Electrode Clip is a precision-engineered component designed for use across a wide range of gas ranges. Constructed from durable metal, the clip plays a critical role in securing th...
$19.93
In Stock
Screw
PartSelect #: PS271689
Manufacturer #: WH2X930
This screw is sold individually.
$16.05
In Stock
Burner Cap - Medium
PartSelect #: PS241260
Manufacturer #: WB29K10001
This burner cap sits on top of the burner base.
$71.45
In Stock
Gas Valve Knob
PartSelect #: PS1021811
Manufacturer #: WB03T10236
Sold individually. This knob takes a D-shaped shaft.
$23.60
In Stock
Spark Igniter Switch and Harness Assembly
PartSelect #: PS953094
Manufacturer #: WB18T10339
This part is the spark igniter switch and harness assembly for your gas range. This harness assembly has 4 igniter switches already wired into it. It includes the igniter switches and the complete wir...
No Longer Available
SPARK MODULE
PartSelect #: PS17872541
Manufacturer #: WB13X46909
This module provides reliable ignition. Replace if burners stop sparking. This part is designed to keep your appliance operating reliably and efficiently. Replacing a worn or failing component helps p...
$75.92
In Stock
Manuals & Care Guides for JGP933BEK1BB
Click to downloadQuestions And Answers for JGP933BEK1BB
Ask our experts a question about this model and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Elizabeth
May 18, 2023
I am looking to replace the grates on the cooktop
For model number JGP933BEK1BB
Hi Elizabeth,
Thank you for your question. The part number for the double burner grate is PS955103. We hope this helps!
Did this question help you?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the JGP933BEK1BB
[Viewing 4 of 4]Will Not Start
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burner wouldn't light
I removed the old igniter by working a thin screwdriver under the edge of the igniter, and carefully prying it up. I then used pliers to pull off the electrical wire. Connected up the new igniter, and pushed it back into the hole. A very simple repair.
I've replaced 2 igniters on this stove. My symptoms were that when I tried ... Read more to light one of the bad burners I heard clicking, and could see the spark on the other (working) burners. So I knew the basic sparking function was working. Just that the igniter on the broken burner would not spark.
I've replaced 2 igniters on this stove. My symptoms were that when I tried ... Read more to light one of the bad burners I heard clicking, and could see the spark on the other (working) burners. So I knew the basic sparking function was working. Just that the igniter on the broken burner would not spark.
Read less
Parts Used:
-
Jeffrey from Freehold, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
53 of 63 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Constant Clicking from the igniters
I first removed the top of the cooktop, which was 12 screws with a special star shape to them. Then had to pull the igniters out with some pliers (they have a really tight fit). Then remove the harness. Then I replaced the harness. After assembling, I replaced one of the ceramic igniters due to it being covered in baked on grease. Wo
... Read more
rked perfectly after that. I thank PartSelect for having super fast delivery. I ordered my parts on a Monday, they were at my doorstep the very next day, I was like WOW. And I chose regular shipping. Thank you very much for your service and your salespeople were VERY helpful, even after 3 order changes.
Read less
Parts Used:
-
Russell from Reedley, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
46 of 59 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No click or ignition after turning on burner - had to replace Ignitor Switch assembly
Do not remove the gas line.
Take off the burner racks and burner covers
Gently extract/remove the ignitors from each burner. You may have to use pliers, but be careful. They are ceramic.
Once you pull out the ignitors, you can remove the ignitors from their wires using plyers, you may have to twist them a ... Read more little.
To take off the top - use Star screw drivers to remove the burners
Remove all the burners.
The star screws, and the burners are the only thing holding the top on.
Take off the steel top.
That exposes the ignitor switch assembly.
Make sure you follow the positioning diagram that comes with the new part.
Thats it really.
I removed the gas, because I thought I had to, but you don't need to. You can do the whole job in 30 minutes if you are careful.
Hope it helps.
You'll have to
Take off the burner racks and burner covers
Gently extract/remove the ignitors from each burner. You may have to use pliers, but be careful. They are ceramic.
Once you pull out the ignitors, you can remove the ignitors from their wires using plyers, you may have to twist them a ... Read more little.
To take off the top - use Star screw drivers to remove the burners
Remove all the burners.
The star screws, and the burners are the only thing holding the top on.
Take off the steel top.
That exposes the ignitor switch assembly.
Make sure you follow the positioning diagram that comes with the new part.
Thats it really.
I removed the gas, because I thought I had to, but you don't need to. You can do the whole job in 30 minutes if you are careful.
Hope it helps.
You'll have to
Read less
Parts Used:
-
Ken from Stony Brook, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
21 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!