JES1855PCH - Overview
Models starting with JES1855PCH
Click on the best match to narrow your results.
- JES1855PCH General Electric Microwave (GE Microwave Model JES1855PCH Parts)
- JES1855PCH (AT7EGEU) LG Wall Oven
- JES1855PCH (AB7EGEU) LG Wall Oven
- JES1855PCH001 General Electric Microwave (Counter Top)
- JES1855PCH02 General Electric Microwave (Counter Top)
- JES1855PCH03 General Electric Microwave (Counter Top)
- JES1855PCH04 General Electric Microwave (Counter Top)
Keep searches simple, eg. "belt" or "pump".
Micro Switch
PartSelect #: PS3522738
Manufacturer #: 3B73362F
This microwave door switch provides power to the various components in the microwave when the door is in a closed position, and interrupts power when the door is open. This door switch is approximatel...
$21.45
Special Order
Rotating Ring Guide
PartSelect #: PS952406
Manufacturer #: WB06X10584
This part has the 3 legs and is not formed in a circle.
$40.02
In Stock
Glass Cooking Tray
PartSelect #: PS956219
Manufacturer #: WB49X10135
This tray rotates in your microwave ensuring more even temperatures.
No Longer Available
Time Delay Fuse
PartSelect #: PS3522743
Manufacturer #: 3B74133Q
The fuse-time delay may also be known as a line fuse or a microwave fuse, and it is a piece for your microwave. The function of this part is to shut off the microwave if there is a power surge, in ord...
$11.77
In Stock
Motor Synchronous
PartSelect #: PS3529208
Manufacturer #: 6549W1S011B
This AC synchronous motor is a genuine OEM replacement part specially made for microwaves. It operates on an alternating current, and it is responsible for rotating the turntable to ensure even heatin...
$36.85
In Stock
Turntable Roller Guide
PartSelect #: PS227922
Manufacturer #: WB06X10209
This Y shaped roller guide sits under the microwave glass turntable.
No Longer Available
Magnetron
PartSelect #: PS3529034
Manufacturer #: 6324W1A001L
This magnetron in your microwave creates the radiation needed for cooking or warming your food. It is located inside the main cavity, typically near the transformer or waveguide. When the magnetron be...
$130.68
In Stock
Diode (Cable, Assembly)
PartSelect #: PS3529603
Manufacturer #: 6851W1A002E
Usually found kitchen appliances, this OEM-certified diode cable assembly helps to convert power from the transformer to the magnetron, to heat up your food. A damaged cable assembly will cause your a...
$17.15
In Stock
Switch,Micro
PartSelect #: PS3522736
Manufacturer #: 3B73361E
This is a micro switch, but you may also know it as a door switch and it is compatible with your microwave. The function of the micro switch is to communicate to the electronic control board of your a...
$21.45
Special Order
Common Symptoms of models starting with JES1855PCH
[Viewing 7 of 7]No heat
Fixed by
these parts
these parts
Show All
Tray won’t turn
Fixed by
these parts
these parts
Show All
Won’t turn on
Fixed by
these parts
these parts
Show All
Doesn’t shut off
Fixed by
these parts
these parts
Show All
Door stuck closed
Fixed by
these parts
these parts
Show All
Door not closing properly
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Motor Burned Out On Turntable
My 8 year old daughter cleaned the inside of the microwave with enough water to rival a tsunami. Resulted in a clean microwave with a fried out motor that no longer revolved. Part came quickly. Took cover and bottom off to get to the part. One screw held it on and a plug. Removed those, put on new part and she was good to go. No tri
... Read more
p to home depot today.
Read less
Parts Used:
-
Steven from Oak Forest, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
37 of 49 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken door micro switch. (unit does not start heating)
Unplug the unit before servicing. Need phillips screwdriver. Open door. Use step ladder to access and remove 2 small screws from top of the room air diffuser at top of unit. Slide diffuser slightly to the left to align the diffuser's plastic tab on the left side to rotate toward you. (The wires for the front control panel are at the far l
... Read more
eft side of this difuser, but difuser is slotted for easy removal). Once the difuser is removed you will see 1 screw at the top that secures the pannel cover on the left side of the unit. Remove screw and slide this panel slightly up and out. This exposes the plastic frame that holds the upper and lower door switches. To locate the door switches and observe how they work, close and open the door and watch the door (bayonets) open and close the micro switches. Do the (red) buttons on top of the switches move up and down when the door bayonets push and release? If the buttons do not "pop" up when opened the switch is defective. The switch frame is secured with 2 screws. Remove screws and rotate the unit out for easy access to the micro switch(s). The internal (spring?) on my unit that is suposed to allow the red (visible) button on top of the switch to "pop" up when the door is opened was broken. Carefully pry the switch outward while being careful to lift the plastic holder-piece that holds the switch in place. Be careful, there is a small pin on the frame, so rotate the switch OUT toward you while lifting (carefully) the plastic holder-piece (you will see it on top of the switch). You can use an ohm meter to test the continuity of the switches. But if the buttons don't "pop" they are defective. Replace switch and reassemble.
Read less
Parts Used:
-
JAMES from BILLINGS, MT
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
37 of 68 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microwave turntable stopped turning
This was probably the easist repair ever. Turns out the shaft of rotating ring assembly that fits over the turntable motor was cracked, so the motor was unable to enage the ring assembly to move it around.
1. lift off (remove) the round glass tray
2. remove the old rotating ring assembly. There was a cracked plasti ... Read more c piece of it still on the motor shaft that I removed with a pair of pliers.
3. slide on the new rotating ring assembly - be careful of the orientation.
4. replace glass tray
1. lift off (remove) the round glass tray
2. remove the old rotating ring assembly. There was a cracked plasti ... Read more c piece of it still on the motor shaft that I removed with a pair of pliers.
3. slide on the new rotating ring assembly - be careful of the orientation.
4. replace glass tray
Read less
Parts Used:
-
David from Sunnyvale, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
9 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!