All Installation Instructions for JES1351WB

My turntable shattered

Partselect sent me the right thing in two days! The whole process was easy as pie.

Parts Used:

Terry from New York, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Intermittent loss of power in open and closing door.

Make sure 110v at the transformer. Activate switch controlled by the push button to open and close door. Push in the small metal arm on the switch with none metallic probe. If power is restored to microwave the switch is faulty and need replacement. One switch is not available, the whole 3 switch assemble has to be purchased.

Parts Used:

HOLDER ASSEMBLY,LOCKER

David from San Francisco, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Powered Off completely

After reading reviews that there was no power what so ever and a fuse replacement will solve the problem, I tried it. Replacing the fuse is very easy (and I am not handy at all). All you have to do is remove the microwave cover from the top by removing two screws, slide the cover to the left and pulling the cover off. Then remove the grill in front of you, by removing one or two screws. The fuse is in front of you, use pliers and be firm but gentle. Replacing the fuse is easy but it did not solve my problem.

Parts Used:

Microwave Fuse

Mohammad from Piscataway, NJ
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Quit working

Just like the directions said. Very simple.

Parts Used:

Microwave Fuse

William from Socorro, NM
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

All power to the microwave went out.

PartSelect had helpful repair instructions on-line which made the repair easier and faster. Unfortunately, there were other problems with the oven that immediately blew the new fuse I had just installed. It was then determined that additional repair would most likely cost almost as much as a new microwave.

Parts Used:

Microwave Fuse

Michael from East China Township, MI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Microwave would turn on ,BUT turn table would not turn and oven would not heat.

Took off cover , unpluged switches , took off switch assy, off/on test hooped and howlered for about 5 mins .Then laughed about other sites said could get those switches. Just wanted to say I LOVE Partselect. Super fast del , great price. JUST AWSOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Parts Used:

Primary Door Interlock Switch

Earl from New Philidelphia, OH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Door Interlock Switch Failed

Removed cover, diagnosed problem, ordered part from Parts Select, received part in 2 days, replaced part, tested and replaced oven into built in space.

Parts Used:

Primary Door Interlock Switch

Michael from Littleton, CO
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Microwave would not heat

I went on line, put in microwave repair and watched a video on repair. I then took the oven down from over the range and took it apart. I could see were the magnetron had burned out. There was a hole with obvious burn marks. I went on line looking for the needed part. I clicked on PartSelect and order the magnetron. I received the part within three days, regular shipping. As I had not put the oven back together it took only a few moments to save 150 to 200+ dollars. I put it back together and happy, happy me, it worked.

Parts Used:

Microwave Magnetron

David from Roanoke, VA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

microwave won't heat

bought a fuse but that didn't solve the problem. Guess I need a new microwave

Parts Used:

Microwave Fuse

Stephanie from Kernersville, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Flame Sensor Dead and Light Bulb Out

The oven overheated when timed cooked was pushed with an empty oven instead of the timer. The oven outside was very warm. I thought the oven was toast and we searched for a comparable one but found they all were rated average to lower than average. So I took the oven cover off aafter buying a special screwdriver bit at ACE Hardware for the security screws. I saw no burned or melted parts. Under the cover was a schematic in an envelope. I traced the hot wire through the fuse and checked the fuse. It was good. Then I traced the neutral wire to a "Flame Sensor" and I wondered what that was. I discovered online that this is an oven over-temperature sensor. I tested the part and it measured infinite ohms. Eureka! I ordered the part and broken light bulb which came promptly. Both parts just require push-on wire connectors and small metal tabs which are bent 90° to hold the parts in place. Very quick and easy repair.

Parts Used: