All Installation Instructions for Hotpoint Refrigerator HTS18BCMCLWW

The fill cup kept breaking and we couldn't find the part. Did a google search and found Partselect.com who had it.

Slide it over the fill hose and just line it up and put it in the slot.

Parts Used:

Icemaker Fill Cup

Lana from Fort Myers, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Had never installed one before and was not sure which was top or bottom. The piece was made different than the original

Unhooked power to valve
Removed old valve by taking out 2 screws.
Used adjustable wrench to remove water lines. Then reversed and hooked everything back up

Parts Used:

Refrigerator Outlet Valve Kit

Paulette from Crandall, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)

2 of 7 people found this instruction helpful.

Was this instruction helpful to you?

The evaporator fan in the freezer compartment began making a loud noise.

I found a replacement evaporator fan motor and 2 mounting bracket grommets at PartSelect.com at a reasonable price. I watched the installation video provided and installed the new parts as shown in the video start to finish installation time 22 minutes.i

Parts Used:

Evaporator/Condensor Fan Grommet

Boyd from Rapid City, SD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Bad switch for door prevented interior light from coming on

Just as your video described, although due to the age of the fridge, it took a bit longer to remove the defective switch. Your video made this so simple, I can't imagine why we lived with a dark fridge for so long! I was ready to buy a whole new fridge, as repairmen are often nonexistent for small repairs. I am the biggest fan of your company & it's repair video. THANK YOU SO MUCH

Parts Used:

LIGHT SWITCH

Patricia from Sylva, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

ice maker just stopped

part arrived on schedule,

Parts Used:

Refrigerator Outlet Valve Kit

larrie from punta gorda, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers

1 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Cracked Dairy Door

PartSelect shipped me the part and it arrived in less than 3 days. It took longer to unwrap the excellent packing than it did to pop the new door into place. Wonderful!

Parts Used:

REFRIGERATOR CLEAR DAIRY DOOR

Fr Kerry from Washington, DC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Center slide missing on crisper drawer

Took out the drawers slipped the new track into place and replaced the drawers.

Parts Used:

Drawer Slide - Center

Deanna from Glendale, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 4 people found this instruction helpful.

Was this instruction helpful to you?

light in freezer section not working

Using plyers Pulled old switch down and out. Put new one in and pushed new switch up into position. The switch plugs into the contacts, no wiring needed. Worked like a charm. You saved me 200 dollars GE repair bill. Thanks

Parts Used:

LIGHT SWITCH

Victor from Fort Myers, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

6 of 24 people found this instruction helpful.

Was this instruction helpful to you?

ice maker wasn't working

removed old valve, installed the new one. ice maker back to making ice.

Parts Used:

Refrigerator Outlet Valve Kit

Carlin from Willits, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Wrench (Adjustable)

Was this instruction helpful to you?

Ice maker was not getting water

Ordered the part from "parts select". Removed old part, installed new part by unscrewing the old switch, simply cutting supply hose ...pluging in the new part and re-attaching water supply line. 10 minutes at most.

Parts Used:

Refrigerator Outlet Valve Kit

Phillip from Atlanta, GA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

The refrigerator made a humming/grinding sound

I used the socket set to remove pannel that allowed me to have access to the evaporator fan. Once the fan and it's container was visible, I removed the entire fan container using the socket set. I took the fan out of the container, removed the damage blade and the damaged fan grommets. I then replace the old blade with the new blade and put the fan and the compartment back together. I am not very handy so if I am able to do this, anybody can. Ps. I was very very pleased with the services I received from PartSelect and would encourage others to use them - must admit I was very suspicious at first.

Parts Used:

Evaporator Fan Blade

Evaporator/Condensor Fan Grommet

Glenroy from Martinsburg, WV
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

Was this instruction helpful to you?

water leaking

i swaped the valve it was very easy, but that did not take care of the proble :(

Parts Used:

Refrigerator Outlet Valve Kit

eduardo from oakland, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Replaced valve to ice maker

had to replace copper water line to valve

Parts Used:

Refrigerator Outlet Valve Kit

Ralph Q from Independence, MO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)

Was this instruction helpful to you?

frosting over and freezer not cold enough and not circulating cold air .

Defrosted the refrigerator,power off and cut the 2 wires on thermostat and sodered the new one on and shrink tube sealed the wires,refrigerator works like new!

Parts Used: