HEIP054U Bosch Range - Overview
Models starting with HEIP054U
Click on the best match to narrow your results.
- HEIP054U (02) Bosch Range (ELECTRIC RANGE)
- HEIP054U (01) Bosch Range (ELECTRIC RANGE)
- HEIP054U (05) Bosch Range (ELECTRIC RANGE)
- HEIP054U (03) Bosch Range (ELECTRIC RANGE)
- HEIP054U (06) Bosch Range (Electric Range)
- HEIP054U (07) Bosch Range (Electric Slide-In Range)
- HEIP054U/08 Bosch Range (Benchmark Electric Slide-In Range 30-Inch Stainless Steel)
Keep searches simple, eg. "belt" or "pump".
SLIDE
PartSelect #: PS12587595
Manufacturer #: 12024638
This push-to-open warming drawer slide kit is engineered to restore smooth, handle-free operation to compatible warming drawers. Designed for select Bosch, Thermador, and Gaggenau ranges, the kit enab...
$136.88
In Stock
SHELF
PartSelect #: PS9495699
Manufacturer #: 00798845
This wire oven rack provides a stable, flat surface for baking, roasting, and cooking, ensuring even heat distribution throughout the process. Designed for durability and a precise fit, it helps organ...
$67.82
In Stock
SENSOR
PartSelect #: PS10057828
Manufacturer #: 00630873
This genuine temperature sensor ensures precise heat regulation inside your oven for consistent cooking results and improved safety. Designed to measure the oven cavity temperature, it communicates wi...
$50.60
In Stock
Bake Element
PartSelect #: PS9495682
Manufacturer #: 00791650
This bake element is a heating component located at the bottom of the oven cavity, designed to deliver consistent and reliable heat for baking and roasting. It cycles on and off to maintain the set te...
$97.29
In Stock
DISPLAY MODULE
PartSelect #: PS12742171
Manufacturer #: 12029207
Discover the power of the genuine OEM Bosch Display Module, designed to perfectly fit and function with specific models of Bosch, Thermador, and Gaggenau appliances. This essential part controls and b...
$212.82
In Stock
00 Energy Regulator
PartSelect #: PS8729307
Manufacturer #: 00629049
This genuine OEM energy regulator helps control the heat output of an electric surface burner by regulating power levels from low to high. Replacing a faulty switch can restore proper temperature cont...
$53.52
In Stock
DOOR-OUTER
PartSelect #: PS9495668
Manufacturer #: 00771361
This outer oven door panel serves as the exterior heat shield and protective surface for your Bosch wall oven or range, helping maintain heat efficiency while providing a sleek, durable finish. Often ...
$298.25
In Stock
HEATING ELEMENT
PartSelect #: PS16763573
Manufacturer #: 10024579
Are you looking for a way to keep your Bosch refrigerator running smoothly? Our genuine OEM Bypass Filter is exactly what you need. Specifically designed for select models of Bosch, Thermador, and Gag...
$110.49
In Stock
Common Symptoms of models starting with HEIP054U
[Viewing 3 of 3]Little to no heat when baking
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Need to replace bake element
First, cut the power and remove the oven from the cabinet.
The bake element is accessible from the back and sits in a drawer.
As someone else said, you have to use pliers to bend the cover of the drawer, you will make some damage to the cover, but there is nothing you can do about it.
Make a note of what w ... Read more ire goes to the right and to the left so you can plug them back like it was before.
When you replace the bake element, make sure you insert it in the straps so it won't wiggle when it heats.
To close the cover that you bent, you will need a helper and push really hard.
The bake element is accessible from the back and sits in a drawer.
As someone else said, you have to use pliers to bend the cover of the drawer, you will make some damage to the cover, but there is nothing you can do about it.
Make a note of what w ... Read more ire goes to the right and to the left so you can plug them back like it was before.
When you replace the bake element, make sure you insert it in the straps so it won't wiggle when it heats.
To close the cover that you bent, you will need a helper and push really hard.
Read less
Parts Used:
-
Ludovic from MIAMI BEACH, FL
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
6 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven was not heating properly
-
Barry from MONROE, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control panel would randomly flicker, fade to black or become non-responsive when subjected to the heat/steam of the open range.
Watch the YouTube video.
Turn off power or unplug the range.
Remove 5 gas control knobs.
Remove four T20 screws on Control panel. one on each end, L and R, two underneath, L and R.
Pull off control panel and carefully flip it up onto the range, being careful not to stretch the wiring harness.
Carefully remove two ... Read more wiring connectors (pinch and pull method)
Remove four T20 screws securing the Control panel mount then turn it over 180 degrees.
Straighten the mounting tabs until the control panel easily slides off of its mount.
Remove and replace the control panel and sheet.
Reverse the procedure to reinstall.
It took me longer to clean the components and the area that to repair the problem.
Tip: Isopropyl alcohol in a spray bottle and a cloth cuts the grease and grime, if needed, with very little effort and no scratching.
Turn off power or unplug the range.
Remove 5 gas control knobs.
Remove four T20 screws on Control panel. one on each end, L and R, two underneath, L and R.
Pull off control panel and carefully flip it up onto the range, being careful not to stretch the wiring harness.
Carefully remove two ... Read more wiring connectors (pinch and pull method)
Remove four T20 screws securing the Control panel mount then turn it over 180 degrees.
Straighten the mounting tabs until the control panel easily slides off of its mount.
Remove and replace the control panel and sheet.
Reverse the procedure to reinstall.
It took me longer to clean the components and the area that to repair the problem.
Tip: Isopropyl alcohol in a spray bottle and a cloth cuts the grease and grime, if needed, with very little effort and no scratching.
Read less
Parts Used:
-
Alan from COLUMBUS, NJ
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Pliers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!