HBL5351UC/08 Bosch Wall Oven - Overview
Sections of the HBL5351UC/08
[Viewing 7 of 7]Keep searches simple, eg. "belt" or "pump".
SHELF
PartSelect #: PS9495699
Manufacturer #: 00798845
This wire oven rack provides a stable, flat surface for baking, roasting, and cooking, ensuring even heat distribution throughout the process. Designed for durability and a precise fit, it helps organ...
$66.25
In Stock
Bake Element
PartSelect #: PS9495682
Manufacturer #: 00791650
This bake element is a heating component located at the bottom of the oven cavity, designed to deliver consistent and reliable heat for baking and roasting. It cycles on and off to maintain the set te...
$95.04
In Stock
SENSOR
PartSelect #: PS8729847
Manufacturer #: 00642855
This temperature sensor is an OEM replacement part designed for use in ovens/ranges. The sensor detects the temperature inside the oven and relays this information to the control board, which controls...
$59.14
In Stock
DOOR-OUTER
PartSelect #: PS9495668
Manufacturer #: 00771361
This outer oven door panel serves as the exterior heat shield and protective surface for your Bosch wall oven or range, helping maintain heat efficiency while providing a sleek, durable finish. Often ...
$291.35
In Stock
HEATING ELEMENT
PartSelect #: PS16763573
Manufacturer #: 10024579
Are you looking for a way to keep your Bosch refrigerator running smoothly? Our genuine OEM Bypass Filter is exactly what you need. Specifically designed for select models of Bosch, Thermador, and Gag...
$107.93
In Stock
00 Halogen Lamp
PartSelect #: PS8729006
Manufacturer #: 00624404
This halogen lamp is a replacement light bulb used inside ovens, ranges, and microwaves to provide bright, clear illumination while cooking. It restores proper visibility when the original bulb burns ...
$45.46
In Stock
Questions And Answers for HBL5351UC/08
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the HBL5351UC/08
[Viewing 3 of 3]Little to no heat when baking
Fixed by
these parts
these parts
Show All
Oven is too hot
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven heating temp not turning off at set temp/overheating
Removed the wall oven to access temp probe connector strapped to the back of the oven. removed 2 screws holding probe inside the oven & replaced. Searched for the "fixing kit" thermostat part I was suggested to replace along with the probe. No thermostat type part was found in my oven, even though Bosch says it fits "somewhere". Reinstall
... Read more
ed the wall oven & tested. The temperature is working normal now. Will return the fixing kit.
Read less
Parts Used:
-
Jaymie from Intercourse, PA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
9 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Need to replace bake element
First, cut the power and remove the oven from the cabinet.
The bake element is accessible from the back and sits in a drawer.
As someone else said, you have to use pliers to bend the cover of the drawer, you will make some damage to the cover, but there is nothing you can do about it.
Make a note of what w ... Read more ire goes to the right and to the left so you can plug them back like it was before.
When you replace the bake element, make sure you insert it in the straps so it won't wiggle when it heats.
To close the cover that you bent, you will need a helper and push really hard.
The bake element is accessible from the back and sits in a drawer.
As someone else said, you have to use pliers to bend the cover of the drawer, you will make some damage to the cover, but there is nothing you can do about it.
Make a note of what w ... Read more ire goes to the right and to the left so you can plug them back like it was before.
When you replace the bake element, make sure you insert it in the straps so it won't wiggle when it heats.
To close the cover that you bent, you will need a helper and push really hard.
Read less
Parts Used:
-
Ludovic from MIAMI BEACH, FL
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
6 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken glass/door won't stay closed
installed new front glass panel.
installed thin magnetic catches on each side of door
installed thin magnetic catches on each side of door
Parts Used:
-
Michael from DES MOINES, WA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!