The tub dampening straps support the wash tub and reduce vibration by keeping the tub at the center of the cabinet. If your washer shakes and moves, or is making a loud banging noise during the wash c...
This clip ensures that the knob is securely fastened to the control shaft, allowing you to properly select the correct time and setting for your dryer. If your dryer will not start or shut off, the ti...
The drain hose is black in color and made of flexible material. This is a part for your top-load washer. The hose measures 57 inches long. This part moves the water out of the washer and into the drai...
This is a dual-action agitator for a washer. It is an OEM replacement part that is sourced from the manufacturer. The agitator tosses your clothes to clean them efficiently. This plastic dual-action a...
This timer dial with compression ring shows you which part of the cycle your washer is in. It is white in color and can be found mounted on the timer shaft. You may need to replace this part if your ...
The main tub seal is located between the transmission and the outer tub. Its the primary water seal in the outer tub for the transmission-shaft. If your washer is leaking during the fill cycle, or at ...
This is a tub bearing and it is meant to work in conjunction with your washing machine. The purpose of this part is to aid in keeping the inner tub of your washing machine spinning smoothly during a w...
This split ring is supplied by the original equipment manufacturer, and it is designed to secure the tub bearing in washing machines. It is a circular metal ring, with an outer diameter of 2 inches. T...
This tub bearing goes in your washing machine. You will find it on the bottom of the outer tub, where the transmission goes through the tub. If you hear metal on metal when the washer is spinning, you...
Used in conjunction with the timer dial knob assembly.
$19.31
In Stock
Questions And Answers for GTW180SSJ0WW
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jessikapesina
December 11, 2019
My washer does want to spin it fills up with water and drains the water.But doest spin at all
For model number GTW180SSJ0WW
Hello Jessikapesina, thank you for your question. There are a few parts we would recomend testing/replacing to fix this issue. The first is Lid Switch with Wire Harness Part Number: WH12X10334. If this part doesn't activate the unit will not agitate. You should also check the belt 6-Rib Drive Belt Part Number: WH01X10302 and the PartSelect Number: WH45X22698. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jeff
2 days ago
Hello,
I am having an issue, my washing machine is running on a continuous fill, and not cycling to the other cycles. I have replaced the timing switch (your video) but it does not seem to have fixed the issue. If I manually switch the dial to the rinse cycle, this will finish through to the rest of the cycles. However if I turn on my washer on the heavy/normal/light cycles they will continuously fill up.
This all started when I moved the washer from it's original spot. Any help would be appreciated as I don't want to buy a new washer.
Thanks,
For model number GTW180SSJ0WW
Hi Jeff, thank you for your inquiry. As you have already replaced the timer and the issue still persists, we would suggest checking the pressure switch, part number PS11701136, to solve the problem. We hope that helps!
Hello and thank you for writing.
Tangled, twisted or knotted clothes are usually a result of improper sorting of wash loads. Never wrap the clothes around the agitator. See Washers Proper Washer Loading. Be sure your wash water is not too hot for the fabric. The squeaking noise could be a faulty tub bearing PS271510 and washer PS271509. Inspect for damage and replace it if needed. We hope this helps. Please contact us anytime if you require further assistance.
How do I replace the agitator on my washing machine?
For model number GTW180SSJ0WW
Hi Bob, thank you for reaching out. We have researched your model and attached a relevant video that might help you with your problem. We hope that helps, good luck with your repair!
Was this helpful?
Thank you for voting!
Bob
October 31, 2023
Water drips into the tub when not running
For model number GTW180SSJ0WW
Hello Bob, thank you for your question! Based on the description that you have provided, we would recommend checking the water fill nozzle, part number PS756806. We hope this solves your problem!
After removing frt panel which prys off I checked for anything obvious like a loose belt. Then I jiggled the magnet switch located on the inside of the loading cover. I saw the machine start agitating the it stopped again when I stopped touching it. I ordered the new part and spliced it in with the wire crip tool. Now the machine is A ok.
To diagnose, first I unhooked the washer: power, water supply, and drain pipe. I then slid the washer out, laying it on its front. With nutdriver, I unscrewed two screws that held the other end of the drain tube and removed it completely. Then, again with the nutdriver removed 4 screws from the back near the legs, two in between the leg
... Read mores in the middle, and approx. 4 to 6 on the bottom. This let me pull the bottom off partially to access the motor area. (I did did not take the bottom completely off, only about 2/3 off and let it bend over, as it was flexible tin) The belt was broken. After receiving the new belt, I positioned it between the pulley and the motor and between the drum and the big pulley. Then I rotated the big pulley, pulling the belt onto it as I rotated. At the same time, as I rotated, I pulled the other end of the belt on to the little pulley. Once it was on, I would put pressure on it as I turned the pulley, to jump the belt to the appropriate grooves on the little pulley. Note: the replacement belt had been modified, so it had one less groove than the pulley. I would have known this if I had read the insert that came with the belt first! Anyway, this was not a problem, only a design change. Also it was important to start the belt on the inside, so if it slipped, you didnt loose your bite. Total diagnostic, repair, and reassembly time: 30 minutes plus or minus. I had read other online forums that said you had to loosen the motor, etc. And I do know some type of a belt installation tool was offered on line, but I got along fine with my installation method. An extra set of hands would have been helpful, but not necessary.
Simply put hands, one under each side of the agitaror and pulled up. The part snapped off very easily. I then placed the new part in the tub and pressed down. Extremely easy, should have done it sooner!
