All Installation Instructions for General Electric Refrigerator GTS18CBSFLWW

cover was cracking on sides

removed bins ......removed cover .....replaced with new cover....replced bins back .....done !

Parts Used:

Crisper Drawer Cover

merlin from TRENTON, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Simple

Removed old one lined up drawers, wonderful, great company to buy from and do business with, thank you

Parts Used:

Crisper Drawer Cover

Eleanor from OREFIELD, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Parents in assisted living. Frig was missing a shelf.

Just put the refrigerator door shelf in. Was to happy to fix this missing piece. So glad this company was able to supply an old part.

Parts Used:

Door Shelf Bar

Jo from MCDONOUGH, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

had no access cover on back

screwed the cover on just like the original

Parts Used:

Access Cover

Ronnie from BATON ROUGE, LA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

1 person found this instruction helpful.

Was this instruction helpful to you?

broken

lifted old broken bar & replaced with new

Parts Used:

Door Shelf Retainer Bar

THELMA from APOPKA, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

None

Just place the shelf door bar in slot and push in place gentle.

Parts Used:

Door Shelf Bar

Ella from RODESSA, LA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Light Switch Not Working - Needed New Switch

Remove the top cover above the door by lifting it slightly and pulling forward. I used a mirror to make sure that there was nothing in the way of accessing the switch from above. I used a blade screwdriver to press against the switch retainer on the topside, while GENTLY prying from below with another blade screwdriver to get the switch dislodged. Once the retainer was past the opening, I wiggled the switch downward and then rotated it to the left when the rounded top right edge of the switch was visible. This allowed the wiring to the connector to pass thru the hole. I pushed the wiring from the top and pulled from below to get the connector below the opening for the switch. I then unplugged the switch, plugged in the new switch and reversed the removal process feeding the connector thru first then rotating the switch to the right to get the rounded edge of the switch thru the opening, then pressed the switch up into the opening until it snapped into place. Total time less than 10 minutes.

Parts Used:

LIGHT SWITCH

Joe from SUGAR LAND, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Door shelf retainer bar broken.

Removed the old bar and slipped the new one in.

Parts Used:

Door Shelf Retainer Bar

Edith from WARRENTON, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Light went out in refrigerator

Pop out switch, pull wires, attach wires to new switch and pop back in. Easy smeasy!

Parts Used:

LIGHT SWITCH

Gary from EAST JORDAN, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

40 year old refrigerator brittle light switch fell apart

with a jewelry screwdriver I pried the lock tab in and pulled switch down carefully, the hardest part was that the power wire connector was stuck on good but the pliers and the jewelry screwdriver was its match for a bout 5 minute for one connection a simple pull off prong connection. After the wire connected back to switch it popped back in SNAPP

Parts Used:

LIGHT SWITCH

Loren from EL PASO, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Broken light switch

took a little more effort than the video show to remove old module and replace new. Works fine now.

Parts Used:

LIGHT SWITCH

Ted from SANDWICH, IL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Light was flicking

It was way to ez to install only a couple of minutes that's it

Parts Used:

LIGHT SWITCH

Stephanie from KEARNY, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Vegetable Pan Was Broken

I lifted old one out and place new one in

Parts Used:

Crisper Drawer Cover

GEORGE from CORAM, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

gasket was not easily fitted

I did not do the repair but observed a friend trying to replace gasket in refrigerator. It was a very difficult procedure. He works as a handyman so he knew what he was doing and had to manually fit gasket with some help with a hammer. Gasket did not go in easy and had to be forced to fit until job completed/

Parts Used: