GTDP301EL0WS General Electric Dryer Parts & Repair Help | PartSelect
We’re open and continuing to ship packages, however we are experiencing shipping delays. Call volumes are high, please use our self-serve options to cancel or return your order. Learn about our response to COVID-19
Models > GTDP301EL0WS

GTDP301EL0WS General Electric Dryer - Overview

Manuals & Care Guides for GTDP301EL0WS

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(146)
PartSelect #:PS755842
Manufacturer #:WE1M504
This is a drum bearing slide, also known as bearing drum slide, glide, or pad, that is fitted to a dryer. The slide supports the front drum as the drum rotates. Check both slides f...
$8.88
In Stock
(23)
PartSelect #:PS6447706
Manufacturer #:WE1M1067
The drum slides support the front of the dryer drum. As they start to break down it may cause your dryer to make noise or not dry clothes in the usual amount of time. You will need...
$7.46
In Stock
(44)
PartSelect #:PS960316
Manufacturer #:WE3M26
This front drum bearing helps your dryer operate as quietly as possible. This is an OEM part and is sold individually. It is about 10 inches in height and 22 inches in width. It is...
$38.49
In Stock
(36)
PartSelect #:PS9861764
Manufacturer #:WE09X20441
This is a duct felt seal for a dryer. The duct felt seal allows the front-load dryer drum to glide smoothly on the front panel. Your dryer will not function properly if the drum fe...
$6.84
In Stock
PartSelect #:PS267091
Manufacturer #:WE1X980
This clip ensures that the knob is securely fastened to the control shaft, allowing you to properly select the correct time and setting for your dryer. If your dryer will not start...
No Longer Available
(89)
PartSelect #:PS1766009
Manufacturer #:WE12M29
This is a dryer drum drive belt. It is 89.5 inches long with four ribs on the inside for a better grip. The drive belt on your dryer attaches to the motor pulley and then wraps aro...
$29.74
In Stock
(11)
PartSelect #:PS267529
Manufacturer #:WE25M40
This rear drum bearing kit includes a shaft, ground strap, bearing, seven screws, and installation instructions. The bearing plate comes with a slot in it for the ground strap. Thi...
$54.09
In Stock
(48)
PartSelect #:PS11767017
Manufacturer #:WE18X25100
This is a lint filter screen that is used for many dryers. It has a metal screen with a white plastic frame, and is approximately 13 inches wide. This part is sold individually. Th...
$44.85
In Stock
(31)
PartSelect #:PS9494490
Manufacturer #:WE01X20419
This part is on the outer door of the dryer.
$14.84
In Stock
(40)
PartSelect #:PS8690648
Manufacturer #:WE4M533
This is a genuine OEM replacement timer (60Hz) for your dryer. To complete this repair you will need a #2 Phillips screwdriver. To access the timer, you will need to remove the top...
$87.85
In Stock
Questions and Answers for GTDP301EL0WS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Due to over loading of the dryer the drum ruined the slides and was making a bad noise due to plastic rubbing plastic

  • Customer: Matthew from Plainfield, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 734 of 827 people found this instruction helpful
It was pretty easy. After already taking apart the dryer to install a new belt I knew exactly my plan of action. I removed the two screws that hold the top panel of the dryer to the front panel. I then removed the top panel and removed the screws that hold the front to each side panel. I than pulled the front away from the cabinet and drum. I put the ne... read more

Dryer was squeeling when running.

  • Customer: Daniel from Chicago, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 668 of 749 people found this instruction helpful
I removed the two screws at the front above the drum opening (with the dryer door open). The top panel then lifts off. I removed the screw at each side that holds the front panel to the side panels, tilted the front panel forward, which disengages the front of the drum from the front drum glide bearing. I then lifted the front panel slightly, unhooking th... read more

Intermittant squeaking noise

  • Customer: Mark from Addison, IL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 595 of 739 people found this instruction helpful
Basically, I followed the same steps a prior person posted.
1.Removed the two screws inside the door, on the top part of the opening.
2.Lifted up and removed the top.
3.Removed two screws holding the front panel in place.
4.Held up the drum while removing the front panel. I carefully turned the panel so I could get at the drum bearing wit... read more