All Installation Instructions for General Electric Dishwasher GSC3500D35WW

Your part was perfect and easy to pick

Starting removing the screws based on the Users guide document - was surprised to find 4 different types of screws and driver heads - Luckicly I am an adult male and have every tool -

the surprise were the Star screws - the phillips head and soctket screw were one thing -

Everything went well.

Parts Used:

Long Front Panel - White

Lee from Centennial, CO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

the top part of the dishwasher down to bottom

first i see if i could move the metal piece it wouldn't move si i used a flat head screw drive to fix it . the end piece was to long so i cut a piece off it fitting it is not moving

Parts Used:

Dishwasher Rack Slide End Cap

Tracy from Rockland, MA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Several

There is nothing to tell I order send to location and their maintenance installs

Parts Used:

Dishwasher Rack Slide End Cap

Charlene from Nashville, TN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

wheels colapsed

replaced new wheels

Parts Used:

Lower Rack Wheel Kit - 8 Pack

Nick from Chatham, NJ
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Dishwasher pump was frozen

Ordered pump mechanism and replaced defective pump. A very easy replacement

Parts Used:

Pump and Motor Assembly

George from Loving, NM
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench set

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Discovered that the end caps were broken

Removed the broken items and clicked the new ones in place utilizing a pliers

Parts Used:

Dishwasher Rack Slide End Cap

Timothy from Chatham, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

The end cap broke off so when we would pull out the upper rack the whell would fall off of the track.

The end cap snapped into place perfectly without any problems and the rack works like new again. This is the second time I have used PartSelect.com and I am very satisfied with how fast I recieve the product and the easy of finding what I need. I would recommend them to anyone!

Parts Used:

Dishwasher Rack Slide End Cap

Christina from Claremore, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

bottom shelf would not roll properly

so easy! Ordered the rollers and clips ... popped them on and done!!!

Parts Used:

Lower Rack Wheel Kit - 8 Pack

Denise from Fair Oaks Ranch, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

wheel was distorted

Simply replace wheel

Parts Used:

Lower Rack Wheel Kit - 8 Pack

R. Cecil from Norfolk, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

The original lower dishwasher dishrack on this portable dishwasher was so shoddy that the rubber coating on it eroded so that the metal underneath rusted and caused rust spots on the dishes and other parts of the dishrack also rusted completely through and broke off. The door on this dishwasher has

I opened the dishwasher, rolled out the defective/rusty Dishrack, removed it from the dishwasher and replaced it with the new Lower Dishwasher Dishrack.

Before attempting this repair, remember to remove any dishes from the lower Dishwasher Dishrack.

Parts Used:

LOWER RACK

Bonnie from Wilmington, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Rack kept coming off slider due to broken end

Popped in the part

Parts Used:

Dishwasher Rack Slide End Cap

Joyc e L. from Prosser, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

bottom basket of dishwasher kept following out

i needed new rollers and inserts to keep wheels on now its like new when i pull out bottom basket

Parts Used:

Lower Rack Wheel Kit - 8 Pack

stephen from mashpee, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Water leaking out from bottom of Dishwaser

Very easy! Removed 4 screws that was holding the valve to the bracket. Placed bracket over water inlet line. Attached copper threaded coupling with pliers.Screwed valved on to the coupling. Attached bracket to the valve with 4 screws. Reattached water line. Attached bracket to frame of dishwaser. Put kickplate back on and done!

Parts Used: