This ice maker (Complete Icemaker Assembly, Whirlpool Icemaker Kit, Ice Maker Assembly, Refrigerator Ice Maker, Icemaker) receives water from the water inlet valve, freezes it, and dispenses it into t...
The “Icemaker Control Assembly” (Module & Motor Assembly, Ice Maker Control Module, Icemaker Module, Refrigerator Ice Maker Module) is what controls the actions of your ice maker. The control turns th...
The crisper drawer is clear plastic and is located inside the refrigerator. It is used to store fruits and vegetables at a certain temperature to ensure food will last longer. If your drawer is cracke...
This capacitor (Refrigerator and Freezer Compressor Run Capacitor, Run Capacitor) provides the voltage or energy current required to start the compressor and keep it running. It allows the compressor ...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This is a 60 Hertz, 120-volt evaporator fan motor for your refrigerator. This part is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the h...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shelley
October 26, 2023
How to replace water fiter
For model number GR2SHWXPS02
Hello Shelley, thank you for reaching out to PartSelect Canada. Unplug the refrigerator and remove the bottom grill. By removing the bottom grill, it could provide you easier access to the filter cap and provide you to grasp the cap easier. Grip the front of the filter and turn it counterclockwise a quarter of the way, then slide the filter straight out. If it is stuck, place a piece of cloth over the water filter cap. Using standard pliers, lock onto the water filter cap and turn the cap a quarter turn. Do not use too much pressure. Pull the water filter straight out. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Karren
February 23, 2024
what is the dementions of this fridge
For model number GR2SHWXPS02
Hi Karren, thank you for your inquiry. Based on our research, the dimensions of the model you mentioned are approximately width: 32 1/2 inches, depth: 32 1/4 inches, and height: 66 1/2 inches. We hope this information is useful!
Was this helpful?
Thank you for voting!
Roger
February 9, 2020
Water dispenser has a slow drip at dispensing end.
For model number GR2SHWXPS02
Hello Roger, Thank you for the question. We suggest replacing the Water Tube Kit,PartSelect Number PS11730901. This tube delivers water to the dispenser. If the tube did not fix the issue, you may have a defective Valve leaking water through to the dispenser, PartSelect Number PS11739130. We hope this helps.
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the
... Read morepower connection and mount new Ice Maker on the two top screws and install the bottem screw. It took e while for the new Ice Maker to start it's cycle but after it did, it worked GREAT. Part Select service was OUTSTANDING, ordered part one day and received the next. THANKS!!!!
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours.
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck le
... Read moret's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!