All Installation Instructions for Frigidaire Refrigerator GLRT13TES7

Top cools bottom is weak

Unplug, remove 2 screws off back panel inside the freezer. Cut wires on old one and crimped in new one. Light to melt the shrink wrap that came with it. Pretty easy.

Parts Used:

Defrost Thermostat

JUSTIN from NEW BRAUNFELS, TX
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Refrigerator door was not sealing correctly.

Remove screws from lower hinge and carefully remove the door. In my case it was the lower bearing, flip door upside down being careful to remove anything which might fall off first. I removed the door stop and then pulled the broken bearing out with pliers. Then I pushed the new one in and reassembled it.

Parts Used:

Hinge Bearing

Edward from Andover, CT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Gasket broke on bottom

Popped the old one out and pressed the new one in. Very easy. Pressed new one in my hands. Fits in a channel. Very easy

Parts Used:

Fresh Food Door Gasket - Black

Johnnie from NEWPORT, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The original part was plastic/and broke

unscrewed to little bolts and installed the new/metal part we got rfom partselect.If we may say.this is a great company to buy from! Fast!

Parts Used:

Upper Hinge

John from Lancaster, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Broken door shelf bin

Opened the box, snapped it in place. Took longer to just open the box! I carefully inspected the part and compared to the original. I could not tell them apart. The fit and finish is perfect. This is a very well made product. Easy to order, fast shipping, well packaged and very easy to install.

Parts Used:

Refrigerator Door Shelf Bin

Allan from North Miami, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Bin had broken.

Replacement was a snap! Literally! OK there were two snaps. One on each side.

Parts Used:

Refrigerator Door Shelf Bin

Ralph from Shelby Twp, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The refrigerator door did not come for the opening swing to be reversed

I ordered four bearing hinges and drill holes for the hinges on top and bottom of frezer and fridge doors insert the bearing hinges on the holes and all the other part on the door were able to reversed.

Parts Used:

Hinge Bearing

Benjamin from Jersey City, NJ
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set

10 of 24 people found this instruction helpful.

Was this instruction helpful to you?

Freezer too cold

Removed the housing with the light, 4 hexhead screws. This exposed the defrost timer, removed 2 hexhead screws, electrical connector and reassembled the unit.

Great resource and service, thank you.

Parts Used:

Defrost Timer - 60Hz 120V

Curt from Maple Grove, MN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Shelf Held Together with Rubber Bands

Old shelf was removed and the new shelf clicked right into place, an exact match, perfect fit.

Parts Used:

Refrigerator Door Shelf Bin

Leon from Upper Marlboro, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The door shelf broke.

Very easily did the repair -- popped the new door shelf right in the place of the old one! No tools needed, no hardware, easy! The part actually measured 24 3/4 but the replacement part said "26 inches" on website & this was THE replacement part. Put this off for so long--ordered part and recd within 2 days, great!

Parts Used:

Refrigerator Door Shelf Bin

Lori from Catskill, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Door Would Not Close

I stuck a small screw driver under the old switch & it came out really easy. I just unplugged the 2 electrical connectors, and removed the old switch. Installing the new one was just as easy. I am a woman!

I also want to say how FAST PartSelect gets their items to you. It came in ONE day!

Your repair stories are very helpful, I/we would have never known how easy this switch was to replace! Thank you!

Parts Used:

Light Switch

Janice M. from Washington, DC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

light switch did not operate correctly

Piece of cake! The new part just plugged in to socket and back into fridge frame. Appreciated how easy it was to order this part.

Parts Used:

Light Switch

Jeff from Lakeville, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 9 people found this instruction helpful.

Was this instruction helpful to you?

crisper bin had the bottom corner busted, door shelf had cracked

The Pan was a direct swap, as well as the shelf bin. No tools necessary. I'm sure that a repair person would have cost me double what I paid for the same repair.

Parts Used:

Crisper Drawer

Refrigerator Door Shelf Bin

David from Sterling, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 10 people found this instruction helpful.

Was this instruction helpful to you?

moved into a new home and the inside freezer was iceing next to the freezer gasket.

purchased a new freezer gasket. It is still iceing in the freezer but now all over the top part and down the back. The new gasket does not secure tight enough around the entire freezer door when it is closed. It is secured properly to the door but does not "grab" tight enough when the freezer door is closed.

Parts Used: