All Installation Instructions for Frigidaire Refrigerator GLHT214RAW3

Missing parts

The parts snapped right into place. Exactly what I ordered, which was so easy with the Partselect.com web site. I wouldn't hesitate to use them again and recommend to all.

Parts Used:

Kickplate Grille

Refrigerator Door Shelf Bin

John from Port Saint Lucie, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 8 people found this instruction helpful.

Was this instruction helpful to you?

the freezer frosted up and the fridge was not getting cold.

I watched the instructional video and did what it said.

Parts Used:

Defrost Thermostat

Sherry from Newberry, SC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Shelfs broke

Replacing was to slide the shelf in on their stubs. My comment about the refrigerator shelfs is they are not made to last. You open the door and one end at the opening side would break. I check to see if it was hanging up however it has plenty of room.
Rev. Richard Gibson, ADT

Parts Used:

Refrigerator Door Shelf Retainer Bin

Richard from Glenwood, AR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Cracked shelf

Snapped it in shelf in designated slots

Parts Used:

Refrigerator Door Shelf Bin

Leonard from WARRINGTON, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Freezer froze up/ Fridge ran warm

Thawed out freezer, I recommend laying a couple old towels in freezer to soak up melted ice. Replaced old thermostat with new part. Removed 2 screws, removed back plate, unplugged 2 connectors and cut 2 wires. Crimped in new thermostat and repositioned to original part location. Reconnected plugs as I reinstalled back plate. Installed 2 screws and connected power. Works like new! Trouble shooting and part installation video is very helpful, great site!

Parts Used:

Defrost Thermostat

will from bushnell, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

a shelf retainer on our refrigerater broke off.

well, the retainer broke off, so I waited for the new part to come, and when it came, all I had to do was put it on. putting it on took like a second. there were two hooks that the shelf hooked on, so it was really easy.

Parts Used:

Refrigerator Door Shelf Retainer Bin

Sandy from Edmonds, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Broken shelf

Snapped new one in.

Parts Used:

Refrigerator Door Shelf Retainer Bin

Richard from Floweree, MT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Refrigerator Door shelf

Snapped the door shelf into place

Parts Used:

Refrigerator Door Shelf Retainer Bin

Raymond from Grand Rapids, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Frame cracked and became brittle

Put old glass in new frame drop one side under small lip of frame..done..perfect!

Parts Used:

Crisper Pan Cover

Shelley from KENSINGTON, NH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Wife didn't like the upper freezer door bin.

Replaced it with one like the lower freezer door bin. Very easy, just snapped into place.

Parts Used:

Freezer Door Bin

Donald from Jonesboro, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Broken meat pan on Kenmore refrig

Just slid it in. Fit perfectly. Called the Help Line just to double check that the pan would fit and they assured me it would. Pan cost $20 less than through the Sears site because of lower price, lower shipping and no taxes. Oh, and the pan came in just two days. Very happy.

Parts Used: